Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/2ISWXRNKH7OK6SMXM4ZUR46L7VXK3UQA/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "002801c73d83$de604650$0500a8c0@parents",
    "message_id_hash": "2ISWXRNKH7OK6SMXM4ZUR46L7VXK3UQA",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/GBQJTPRJBCOO5WTQWB372JQ3D5UVSCB3/",
    "sender": {
        "address": "ka3hsw (a) earthlink.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "George Henry",
    "subject": "[amsat-bb] Re: Voltage Requirements of ICOM IC-910H",
    "date": "2007-01-21T17:44:56Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/C4YTEQX5UKJEFDVJ5SLX7TRNPCO7V2YI/",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/UNFZHKIGE7CDWUHDA3W3GYMCVUWEWFWT/"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "The power requirements specified in the 910H manual are 13.8 VDC +/- 15%, \nwhich is 15.9 V on the high side.  I would not feel comfortable running mine \nat that level, however.  I would suggest putting a couple of 100A diodes in \nseries with the + side of the power lead to drop it down closer to 13.8.... \n(2 would drop it to about 14.5, which is close to what you might encounter \nin a car with the engine running)\n\n73 de KA3HSW\n\n\n----- Original Message ----- \nFrom: \"Michael Hatzakis Jr MD\" <[email protected]>\nTo: <[email protected]>\nSent: Saturday, January 20, 2007 2:25 PM\nSubject: [amsat-bb] Voltage Requirements of ICOM IC-910H\n\n\n>I am changing my supply for my ICOM IC-910H because my PS-30 is dying.  I\n> have an SGC PS-50 supply that is not regulated, per se, it is a huge \n> supply\n> with massive transformers.  It appears to work fine, but I am worried \n> about\n> the fact that is starts at 16v or so.\n>\n> Specifically, is 15.5 to 16v too high to safely run this radio and is a \n> drop\n> of 1-1.5 volts too much unregulation for proper operation?\n>\n> Michael  K3MH\n>\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb \n\n",
    "attachments": []
}