Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/2MS7UEQ7BNU4PAANRFQJEDGKZQ6QZHXW/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "2MS7UEQ7BNU4PAANRFQJEDGKZQ6QZHXW",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/2MS7UEQ7BNU4PAANRFQJEDGKZQ6QZHXW/?format=api",
    "sender": {
        "address": "ve8rt (a) yknwt.ca",
        "mailman_id": "719ed984cb59438e9a7f3c6e3d9c84f3",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/719ed984cb59438e9a7f3c6e3d9c84f3/emails/?format=api"
    },
    "sender_name": "Ron VE8RT",
    "subject": "[amsat-bb] IC-475H CI-V questions",
    "date": "2020-04-07T05:00:18Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/N2I2RYWRS6EFMGSUZWGWFBXGF7F66VBC/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "  I've recently came into an IC-475H that I'd like to use as the uplink\non linear sats.  But I'm having some trouble getting the CAT control to\nwork.  I'm using grig instead of going in/out of Gpredict just to test\nthe CI-V link.\n\nI thought that this should work in grig:\ngrig -m 307 -r /dev/ttyUSB1 -s 1200 -c 14\n\n  but it doesn't seem to connect.  I have visually verified in the 475\nthe switch settings for the address and speed, they're set to default\n$14 1200 baud.  With nothing connected the DC voltage on the remote\noutput is about 2.0VDC which agrees with the schematic.\n\n  I'm hoping that there is something I've overlooked.  The interface\nwith grig works with my IC-R7000 \ngrig -m 340 -r /dev/ttyUSB1 -s 1200 -c 08\n\n   Ron VE8RT\n\n-- \nRon VE8RT <[email protected]>\n",
    "attachments": []
}