Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/2QHKIH4L7XME7TV3JEWNRTLUJ6KGB6AS/?format=api
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/2QHKIH4L7XME7TV3JEWNRTLUJ6KGB6AS/?format=api", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api", "message_id": "004101ca81bb$be114230$3a33c690$@net", "message_id_hash": "2QHKIH4L7XME7TV3JEWNRTLUJ6KGB6AS", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/BWY7SIU2NEOSCHNUNLPKPZLYO3MCTOGT/?format=api", "sender": { "address": "kb2m (a) comcast.net", "mailman_id": "4f01ae6749a54d178a501e4efec2da0b", "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4f01ae6749a54d178a501e4efec2da0b/emails/?format=api" }, "sender_name": "Jeff KB2M", "subject": "[amsat-bb] Re: 847 PL problems", "date": "2009-12-20T21:31:07Z", "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/WXBBLUAWQGWUN2NAEWV7SZILXAXRAH2O/?format=api", "children": [], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "I fixed the problem with a full reset. In fact this one of the few times\nthat a full reset actually fixed my problem with a radio! I'm sorry I wasn't\nas clear as I should have been in describing my problem. I did say that I\ncould set a PL other than 67.0 when I didn't have the 847 in satellite mode.\nWhen I took it out of sat mode I could achieve a PL of other then 67.0. I\nalso mentioned that it used to work, for at least 10 years. Weird problem,\nthat thankfully was easy to fix... \n\n> and it all points to a problem with my 847. After some testing with\n> different PL's, using another radio with TQSL set, it seems that when in\n> Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I\n> bought new since 1997 and I never had a problem with This.\n\n73 Jeff fkb2m\n\n\n-----Original Message-----\nFrom: Erich Eichmann [mailto:[email protected]] \nSent: Sunday, December 20, 2009 2:07 PM\nTo: Jeff KB2M\nCc: [email protected]\nSubject: Re: [amsat-bb] 847 PL problems\n\nHello Jeff,\nSatPC32 sets the FT-847 sub tone frequency for SO-67 (233.6 Hz) correctly.\n I suppose you have the following data line added to SubTone.SQF:\nSO-67,233.6,$01,36\nThe Parameter $01 is the code of the FT-847 for a 233.6 tone. .\n\nTo check the tone frequency do the following:\nSelect SO-67. CAT steering must be on (C+)\nClick the control T0 to T1. Above the VHF uplink freqence an \"ENC\" appears.\nDisable CAT (C-).\nAt the radio switch the bands. The VHF frequency must be on the left side.\nNow press the \"Menu\" button at the FT-847 and select menu #12.\nIn the display you will see the tone frequency 233.6.\n\n73s, Erich, DK1T\n\n\n----- Original Message ----- \nFrom: \"Jeff KB2M\" <[email protected]>\nTo: <[email protected]>\nSent: Sunday, December 20, 2009 6:03 PM\nSubject: [amsat-bb] 847 PL problems\n\n\n>I just noticed that my FT-847 is having a problem with PL tones. There are\n>a\n> few things happening...\n> It seems to want to stay only in a PL of 67.0. When I try to operate on\n> SO-67 that has a PL of 233.6, I can't get into the bird, unless I\n> tailgate.\n> As it seems to default to a PL of 67.0 I can work SO-50 no problem. I\n> checked all my cables, and also went to a different software control\n> program\n> and it all points to a problem with my 847. After some testing with\n> different PL's, using another radio with TQSL set, it seems that when in\n> Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I\n> bought new since 1997 and I never had a problem with This. When I look\n> back\n> I can't remember when I needed any other PL other then 67.0, except 74.4\n> to\n> open up SO-50, last time about 3 years ago. Before I try a full reset I\n> thought I would ask here, to make sure I'm not missing anything stupid...\n>\n>\n> 73 Jeff kb2m\n>\n>\n>\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>\n\n\n", "attachments": [] }