Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/32XHRTE5XQHMNMII4DRBPNZVPTACR34D/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "32XHRTE5XQHMNMII4DRBPNZVPTACR34D",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/6ASE4ASHZFON3WWYYFEWBF6STQPW2GZ5/?format=api",
    "sender": {
        "address": "rmann (a) latencyzero.com",
        "mailman_id": "121de019d9f84629960e595cfec5bbe3",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/121de019d9f84629960e595cfec5bbe3/emails/?format=api"
    },
    "sender_name": "Rick Mann",
    "subject": "[amsat-bb] Re: Where can I buy pre-made feedline?",
    "date": "2007-12-05T05:53:08Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/CQUJJXHEBTLTUCN4GUSHJZXMCAF2TF5H/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6UTYIOORCAXDZG6U3DHSDHGFAYHAP2CT/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "\nOn Dec 4, 2007, at 9:42 PM, kc6uqh wrote:\n\n> Before you give up I suggest you buy the silver plated PL-259' s If  \n> you can't find them, then with a pocket knife or small file remove  \n> the nickel plating, use a good grade of rosin flux 37% Pb 63%Sn  \n> solder. THe aluminum will not solder but the braid is tin plated  \n> copper. You need a 250 Watt soldering gun or 100Watt iron Heat the  \n> first hole add solder then the second etc after the third hole you  \n> will notice the connector is hot enough for the solder to wick into  \n> the holes.\n\nThanks, but I've already spent a small fortune in additional tools to  \ndo this. I'm done. I just want to buy well-made cables.\n\n-- \nRick\n\n",
    "attachments": []
}