Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/3VTGY6RDLR75FP76PRZT3B4UWTSRFOOC/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "CAGD5MUEgmB22DbBQH8p=14_9BZ+jJK19HiwVDXbDQ4bDXG3vHA@mail.gmail.com",
    "message_id_hash": "3VTGY6RDLR75FP76PRZT3B4UWTSRFOOC",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/3VTGY6RDLR75FP76PRZT3B4UWTSRFOOC/",
    "sender": {
        "address": "zryder94 (a) gmail.com",
        "mailman_id": "6e1fbabbea4b435c8d11571bfdfe2daa",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6e1fbabbea4b435c8d11571bfdfe2daa/emails/"
    },
    "sender_name": "Mike Thompson",
    "subject": "[amsat-bb] Handheld radio and headset interface",
    "date": "2017-04-21T14:15:08Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Thought I would pass something along to the group, and see if anyone is\ninterested.\n\nWhile I have been working on perfecting my dual HT handheld satellite\noperation methods, I discovered that I simply don't have enough hand's,\nears, and eye's for everything. With this limitation in mind, I designed a\nsimple circuit board to interface a headset with a pair of HT's, and an\naudio recorder.\n\nThe board as designed can interface to a pair of FT-60's via 3.5mm TRRS\ncables, or a VX-8 with Yaesu's CT-M11 cable. RX audio is sent to a stereo\nheadset (in mono, of course) and to one channel of a stereo recorder.\nMicrophone audio from the headset mic is sent to the TX radio and to the\nother channel of the stereo recorder. This way, the recorder should capture\nboth sides of the QSO without issue. The recorder has 2 pot's for level\nadjustment of both the TX and RX audio levels to the recorder. I also\nincluded a trimpot to adjust the bias level of the microphone, should one\nwish to lower it for any reason, as well as a header to install a PTT\nswitch. My plan was to mount a momentary switch on a handle I plan to make\nfor my arrow antenna.\n\nI will have 2 extra boards available in a few weeks time when they get back\nfrom my board fab house. If anyone is interested, I can drop one of these\nextra's in the mail, and I would ask for about $25 for them. I can make\nmore if there is a large interest from the group.\n\nEnjoy.\n\nMike, AE0MT.\n",
    "attachments": []
}