Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4UVOE3MFSW53OZIEKRV3MPBN46LWMQJZ/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "4UVOE3MFSW53OZIEKRV3MPBN46LWMQJZ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/4UVOE3MFSW53OZIEKRV3MPBN46LWMQJZ/",
    "sender": {
        "address": "DOBarrows (a) aol.com",
        "mailman_id": "6291da978e164a4a84f239b5b939bafa",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6291da978e164a4a84f239b5b939bafa/emails/"
    },
    "sender_name": "Dobarrows",
    "subject": "[amsat-bb]  SO-50",
    "date": "2010-08-28T00:31:47Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/FRKQI54IZY6ZDL6OZWIT64TQM4MGIEXK/"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Sometimes I have not heard SO-50 on late night passes.  Then I key up \nmy transmitter with a 74.4 hz tone.  After that, I key my transmitter \non and off with a 67hz tone while tuning the receiver set in cw mode \nuntil I find a carrier that goes on and off with my keying somewhere \nnear where I expect the downlink to be.  I then give my station ID and \nchange the receive mode to fm.  I know that SO-50 is alive and well.\n\nI don't know if it is well understood, but SO-50's downlink will only \nbe on as long as there is a signal in the uplink with the 67hz tone on. \nYou let up on the mike and the downlink ceases until someone else \ntransmits.  AO27 and AO51 have  continuous carriers when turned on so \nthey are easier to locate when there is little activity. (Little \nactivity doesn't happen often here in North America on AO27 and AO51).\n\n73,\nDave W8IJ\n\n",
    "attachments": []
}