Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4XC6BXZR2TUSESIXDIEXGUMAMV5NNYLX/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAAdE_rk4V0Z7A6v1=gzjEnKsR5=MR1Ho7ft__11H1Wm4yxDm=Q@mail.gmail.com",
    "message_id_hash": "4XC6BXZR2TUSESIXDIEXGUMAMV5NNYLX",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/YBFYMTYJ6VGD33NDDQXENFXG6AFXLGVF/?format=api",
    "sender": {
        "address": "tuscandude (a) gmail.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Arthur Payne",
    "subject": "Re: [amsat-bb] Ic-910 and SO-50",
    "date": "2015-04-17T10:41:23Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VFQB7PJFZJJ2RJKJJIOJN6XGZ6ZI6IB3/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Thank you for your suggestions I will try them but my main concern was that\nI was sure that I had the tone set but was still unable to access the bird\nand wondered if I had not set the tone properly. I have just acquired the\nic- 910 I have been using an ic-820H and was not sure if I had set the tone\nproperly. The 820 worked with SatPC32 seamlessly but I had to set the 910\nto go to satellite mode so I wasn't sure if I was setting the 910 properly.\nOr if there was something that I had to do. The 910 works with all other\nbirds fine just not SO50.\n\nArt VE3GNF\n\nOn Thu, Apr 16, 2015 at 1:14 PM, Erich Eichmann <[email protected]>\nwrote:\n\n> Hi Art,\n> SO-50 requires a 74.4 Hz sub tone on the uplink signal to be activated and\n> a 67.0 Hz sub tone to be worked.\n> SatPC32 can set both tone frequencies.  Click the \"T\" control (in the\n> uppler left part of the main window) to \"T2\" to select the 74.4 Hz tone and\n> switch the radio to TX for a few seconds to activate the sat. Then click\n> the  control to \"T1\" to set the 67.0 Hz tone. It the sat is active use only\n> T1. With satellites that don't require a sub tone the functions are\n> disabled.\n> 73s, Erich, DK1TB\n>\n>\n>\n> Am 16.04.2015 um 16:45 schrieb Arthur Payne:\n>\n>> Tom I am trying to get my lc-910 to work with satPc32 to work SO-50 an\n>> ideas I have it tracking (I lengthened the delay) but I don't seem to be\n>> able to access the bird.\n>>\n>> Art VE3GNF adpayne@sympaticoca\n>> _______________________________________________\n>> Sent via [email protected]. AMSAT-NA makes this open forum available\n>> to all interested persons worldwide without requiring membership.\n>> Opinions expressed\n>> are solely those of the author, and do not reflect the official views of\n>> AMSAT-NA.\n>> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>>\n>\n>\n",
    "attachments": []
}