Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4YODYUGDW73ZC5RNV3M43QAO7Q5UYVWL/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "627238B33A6E4B9983F80708D7C49792@RadioRoomPC",
    "message_id_hash": "4YODYUGDW73ZC5RNV3M43QAO7Q5UYVWL",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/DCDZ442K5OKQJOWC6XAHKN4NAOH4RBLK/?format=api",
    "sender": {
        "address": "ka3hsw (a) att.net",
        "mailman_id": "afface7d7e8049fda539552165bdde78",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/afface7d7e8049fda539552165bdde78/emails/?format=api"
    },
    "sender_name": "George Henry",
    "subject": "Re: [amsat-bb] PCSat32 Frequency Calibration.",
    "date": "2017-12-19T02:27:12Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/DCDZ442K5OKQJOWC6XAHKN4NAOH4RBLK/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "You need to do it for each satellite.  And AO-73 drifts, so you'll do best\non that one by manual tuning each pass.\n\n\nGeorge, KA3HSW\n\n\n\n-----Original Message-----\nFrom: AMSAT-BB [mailto:[email protected]] On Behalf Of Jason\nRearick\nSent: Monday, December 18, 2017 4:02 PM\nTo: AMSAT BB SAT\nSubject: [amsat-bb] PCSat32 Frequency Calibration.\n\nGroup,  I spent most of my weekend working on my little SSB satellite\nstation.  I am now up and running using a FT-817 for uplink, SRDPlay with\nSDR Console software for downlink, Arrow antenna, and PCSat32.  It was a\nlittle bit of a struggle getting all communicating but I now have it\nworking, and even made some contacts on AO-7, and one of the XW-2 sats.\n(thanks WU2M for working me on three different sats this weekend)   I am\nhaving an issue with calibration on using PCSat32.  One of the passes this\nweekend I noticed I was coming down about 800 - 1200 hz above the station I\nwas receiving, another time I was about that same amount below.  I read\nthrough the help file for PCSat and the next pass I raised my uplink freq.\nso it would lower my freq. in the downlink bandpass.  I also then had to put\nin a correction for my downlink frequency.  After doing this, I was really\nclose to the zero beating the station I worked.   The next satellite I\ntried, I was off again by 1000-1500 k!\nHz.\n\nIs this something I will have to do every pass, for every satellite, or will\nthis offset be saved in PCSat32 in the future passes.  Right now I am\nrunning PCSat in Demo mode, and have paid for registration and waiting for\nmy key to be emailed.  Will things work better once I get it running as\nregistered copy?\n\n\nThank for your time and advice.\n\n\n73\nJason Rearick\nN3YUG\n\n",
    "attachments": []
}