Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/53O2PSFZXRLTXY3GNGTJODXX2OYG6JUS/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "53O2PSFZXRLTXY3GNGTJODXX2OYG6JUS",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/53O2PSFZXRLTXY3GNGTJODXX2OYG6JUS/",
    "sender": {
        "address": "gary_lockhart33 (a) yahoo.com",
        "mailman_id": "55757482b9304228a9e0a09e40de76ac",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/55757482b9304228a9e0a09e40de76ac/emails/"
    },
    "sender_name": "Gary Lockhart",
    "subject": "[amsat-bb]  Orbitron-Wispdde",
    "date": "2009-08-23T00:02:18Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I am trying to put together a computer controlled az-el rotator system with BS2 processor control like KO6TH using U-100 rotors. With Orbitron for satellite prediction and Wispdde comunication I do not get data display on the LCD display. The display works for other program titles. I tried Nova (demo) thinking the BS2 needed different input but still nothing to display. I used Free Serial Port Monitor and could see ASCI output that looked like what I wanted with satellite name, AZ and EL with numbers but the values did not match the satellite tracking program, they never changed! This was true with both Orbitron and Nova. I am using Orbitron 3.71, Wispdde 4.2, 4.3.0.7 and 4.3.0.2 modified by AD5JN. I have tried all the Wispdde programs at 1200 and 9600 baud. My radio is a FT726 so there is no CAT control there to confirm operation of other equipment. I have tried BS2 programs off the web from KO6TH and SAEBRTrack with out success. My BS2 is rev G and I\n am using a SC-IOREL4 relay board to mount the BS2. Demo display and relay programs run fine. I do not understand why the data into the BS2 isn't the same showing on Wisp panel. Any thoughts?\nGary AB3ID\nSnow Hill, MD  \n\n\n\n      \n",
    "attachments": []
}