Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/5AIKRIV4WTHRICHVTPZ7RWDNAWVYA5TY/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "5AIKRIV4WTHRICHVTPZ7RWDNAWVYA5TY",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/5AIKRIV4WTHRICHVTPZ7RWDNAWVYA5TY/?format=api",
    "sender": {
        "address": "updwrb (a) bristor-assoc.com",
        "mailman_id": "6a38e6f613ad494f85758faeecec9d50",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6a38e6f613ad494f85758faeecec9d50/emails/?format=api"
    },
    "sender_name": "w4upd",
    "subject": "[amsat-bb] Re: Yaesu G5500 rotor trouble.",
    "date": "2009-05-03T18:52:16Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I tried once, but the last reply never came through AMSAT-BB yet. So \nI'll answer yours directly which also answered a previous one on getting \nthe parts. I believe your G5500 uses the same elevation (G500b) as my \nG5400 late model. Also it probably has limit switches in the rotator \nwhich will prevent the down from working until it went up a bit. Mine \nstill has a bad motor (actually the armature due to my own fault). As \nlong as it draws current and the lamps dim on the UP selection, the \nmotor itself is probably still good.\n\n********* RESEND  ********\n\nI find this hard to believe unless its related to the G5500. I just got \ndone ordering stuff from Yaesu for my G5400/G500b elevation rotator. \nUnfortunately, the IPB I had with my rotor was for the G500a and the \nparts were wrong and I had to send them back. They did give me credit \nfor the returned parts as well. I have a bad motor and they one they \nsent was for the G500a and was $85.00 However, its size kept it from \nbeing close to being able to be used. When I checked the  G500b IPB and \ngave them  the part number, it was  $207.17!!! So I said forget it. I'd \nfigure a way to fix it.\n\nThe cap you can get anywhere if that is all that is wrong. Mine had over \na pint of water and as such rusted and dried and packed the grease \nkeeping the motor from working. I suspect you have little choice but to \ntake it apart and confirm the problem. Again, unless it is due to being \na G5500, I had no problems getting parts from Yaesu as recently as last \nmonth.\n\nRegards,\n\n     Reid, W4UPD\n    AMSAT #17002\n> I find this hard to believe unless its related to the G5500. I just \n> got done ordering stuff from Yaesu for my G5400/G500b elevation \n> rotator. Unfortunately, the IPB I had with my rotor was for the G500a \n> and the parts were wrong and I had to send them back. They did give me \n> credit for the returned parts as well. I have a bad motor and they one \n> they sent was for the G500a and was $85.00 However, its size kept it \n> from being close to being able to be used. When I checked the  G500b \n> IPB and gave them  the part number, it was  $207.17!!! So I said \n> forget it. I'd figure a way to fix it.\n>\n> The cap you can get anywhere if that is all that is wrong. Mine had \n> over a pint of water and as such rusted and dried and packed the \n> grease keeping the motor from working. I suspect you have little \n> choice but to take it apart and confirm the problem. Again, unless it \n> is due to being a G5500, I had no problems getting parts from Yaesu as \n> recently as last month.\n>\n> Regards,\n>\n>      Reid, W4UPD\n>     AMSAT #17002\n>\n>\n> Kevin Schuchmann wrote:\n>> Hi Alan and Shawn,\n>>    FYI about a month ago I attempted to get that cap from Yaesu and they \n>> said they\n>> no longer sell it by itself, you either buy it with the motor  or  find a \n>> 3rd party\n>> replacement.\n>> 73\n>> wa6fwf\n>>\n>>\n>>   \n>>> If everything checks, then it is _probably_ the 100 uF phase shift \n>>> capacitor\n>>> you can see between the windings in the schematic.  You can get a\n>>> replacement from Yaesu for $10-15 including shipping.  Replacing it is not\n>>> hard, but it is very tedious and messy.  Unlike other versions, the G-5500\n>>> has the capacitor in the motor housing rather than the control box.\n>>>\n>>> I had exactly the same symptoms you describe, and it was the capacitor in \n>>> my\n>>> case.\n>>>\n>>> Good luck,\n>>>\n>>> Alan\n>>> WA4SCA\n>>>\n>>>     \n>>\n>> _______________________________________________\n>> Sent via [email protected]. Opinions expressed are those of the author.\n>> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>> ------------------------------------------------------------------------\n>>\n>>\n>> No virus found in this incoming message.\n>> Checked by AVG - www.avg.com \n>> Version: 8.5.325 / Virus Database: 270.12.15/2093 - Release Date: 05/02/09 14:23:00\n>>\n>>   \n>\n\n",
    "attachments": []
}