Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/5OFNVOTDLLGKB4G6EKZFWK25ENNNHGW6/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "5OFNVOTDLLGKB4G6EKZFWK25ENNNHGW6",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PMNH5PW77UQQLQNLXXICABMAQZLGIKYZ/?format=api",
    "sender": {
        "address": "jbarkley (a) truvista.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Joe",
    "subject": "[amsat-bb] Re: Test Schedule SO-67",
    "date": "2009-11-03T21:08:48Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PMNH5PW77UQQLQNLXXICABMAQZLGIKYZ/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "What day is this for and I assume it is UTC.\nThanks\nJoe\nKI4TZ\n\nChris Bloy wrote:\n> Posted:\n>\n>  \n>\n> 11:30 - 11:41 (Japan)\n> 12:47 - 13:01 (Australia)\n> 15:06 - 15:20 (Canada / USA)\n> 16:43 - 16:55 (Canada / USA)\n> 19:05 - 19:18 (RSA)\n>\n> The CTCSS tone for the transponder is 233.6 Hz.\n>\n> Uplink:  145.875MHz\n> Downlink:  435.345MHz\n>\n> Additional recommendations:\n> Use only narrow FM\n> Switch off compression\n> Speak softly (mic gain down)\n>\n> Satellite characteristics:\n> All antennas are linear vertically polarized (1/4 wavelength)\n> Sat Tx power = 5W\n> Sat Rx sensitivity = -116.5dBm for 12dB SINAD\n> Max antenna gain = 4dBi\n>\n>  \n>\n> Thanks,\n>\n>\n> Chris - M0DQO\n>\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>\n>   \n",
    "attachments": []
}