Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/5PYLHI3WMFS36V5NSZJSKIKESHDUCZHL/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "5PYLHI3WMFS36V5NSZJSKIKESHDUCZHL",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PTMMNQ5I6OULK2FFBIUES5NDQWQCH6NA/?format=api",
    "sender": {
        "address": "aa2tx (a) comcast.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Anthony Monteiro",
    "subject": "[amsat-bb] Re: Receiving RAFT on 216.98 MHz ?",
    "date": "2006-12-08T01:19:49Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PTMMNQ5I6OULK2FFBIUES5NDQWQCH6NA/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "At 04:00 PM 12/7/2006, Douglas Quagliana wrote:\n\n>A quick check around my radio shack confirms\n>that none of my receivers will receive at or\n>near 216.980 MHz.\n>\n>What were other amateurs planning to use to\n>receive the pings from RAFT on 216.98? Is\n>there a bargain-basement no-frills way to\n>kludge something together to receive the\n>signals?\n>\n>Douglas KA2UPW/5\n\n\n---\n\nHi Douglas,\n\nIn the Sept/Oct 2005 AMSAT Journal, there is an article\naout how to build a simple frequency converter for about\n$5 using a pair of 1N914 diodes and a TTL clock oscillator.\nThe circuit was not designed for 217 MHz but it would be pretty\nsimple to adapt it, just change coils L1, L2 and L3. Using a 35 MHz\noscillator, 216.98 would be converted to 146.98 MHz.\n\nThis would not be nearly sensitive enough to hear the 4 mW beacon\non RAFT1 but if you have a spare VHF TV preamp to use in front of it,\nthis would probably be good enough especially if you use a TV antenna\nwith a little gain and point it at the satellite.\n\n73,\nTony AA2TX\n\n",
    "attachments": []
}