Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/5Q6HAA5JQORRY7F7MHYE7YVAYA7V6CWN/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "5Q6HAA5JQORRY7F7MHYE7YVAYA7V6CWN",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/WBKCHD5MONIA6UNBTLNEFTRUYXBOWN4E/?format=api",
    "sender": {
        "address": "n6rfm1 (a) gmail.com",
        "mailman_id": "54ef064bb1ce4fdeb6fa2c7ec7856be8",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/54ef064bb1ce4fdeb6fa2c7ec7856be8/emails/?format=api"
    },
    "sender_name": "Bob Mattaliano",
    "subject": "Re: [amsat-bb] Decoding AO-85 from IC-910H 9600 data socket - any success anyone? -- Success!",
    "date": "2015-10-11T12:57:59Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/WBKCHD5MONIA6UNBTLNEFTRUYXBOWN4E/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/L27XXZTJK4UU7WGGQEWN2VBODYLCSZRR/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Bob,\n\nThanks for the response.  Was using my desktop \"mic-in\" jack.  Soundcard is a built in on my Dell Optiplex 755. Very limited functionality with driver provided, i.e., poor mic input level control and (my) concerns that sub-audible frequencies lost.\n\nSo, switched to a cheap USB soundcard (Begringer UCA202) which happened to be on-hand.  Claimed OK down to 10 Hz.  Not fancy, but can input control level.\n\nTADA!  Works!\n\n73 es tks agn,\n\nBob\n\n---------------\n\nFrom: KO6TZ Bob<[email protected]>\nTo:[email protected]\nSubject: Re: [amsat-bb] Decoding AO-85 from IC-910H 9600 data socket -\n\tany success anyone?\nMessage-ID:<[email protected]>\nContent-Type: text/plain; charset=utf-8; format=flowed\n\nBob,\n\n\nSo far I have uploaded 276 frames of telemetry using the 9600 port of\nthe sub-band on my IC910h.  This is wired directly to the \"Line-In\" of\nmy desk top computer.\n\n   I would not recommend using the \"Mic-In\" jack, or a laptop computer.\nThe 9600 port is used because it offers less filtering of the 0-200 Hz\nof the audio band pass.  This is the portion that is filtered heavily to\nmake PL tones sub audible in the radio , as well as remove 60 Hz and its\n3rd at 180 Hz from the microphone input.\n\n\nBOB  KO6TZ\n\n\n\nOn 10/10/2015 10:30, Bob Mattaliano wrote:\n> Hi,\n>\n> Congrats to the AO-85 team!\n>\n> Trying to decode telemetry using the 9600 output of the sub data \n> (while radio is in Sat mode) from my IC-910H.  Has anyone been able to \n> do this?  High elevation passes only?\n>\n> 9600 output is connected directly to mic input.  No isolation \n> transformers, etc.  Seems like those making progress have gone the SDR \n> route with IQ data?\n>\n> Sound card input - 2 channel (L-R channels connected on cable), 24 \n> bit, 48000 Hz\n>\n> radio - cable to sub band data socket.  9600 bps transmission on. (Is \n> this for TX only, does not change output and  can be left of?)\n>\n> AO-85 software\n>\n> Source - mic input, 4800\n>\n> start --> no joy,\n>\n> Suggestions welcome.\n>\n> Thanks, es 73\n>\n> Bob N6RFM\n> [email protected]\n>\n\n",
    "attachments": []
}