Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/63W7JEUSTNK3ZLF7CES7NDHNLK5GH3OG/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAJCSnOaMMwVNDxXoDB1KpVKxJpOUTVw6+MaWcAtS9qfgppzATQ@mail.gmail.com",
    "message_id_hash": "63W7JEUSTNK3ZLF7CES7NDHNLK5GH3OG",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/7VH2RLW3UH5LSYTDDUMG6WZXWCUVZ5G7/?format=api",
    "sender": {
        "address": "scott23192 (a) gmail.com",
        "mailman_id": "120e10e05ba14969a11da0a96d21e355",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/120e10e05ba14969a11da0a96d21e355/emails/?format=api"
    },
    "sender_name": "Scott",
    "subject": "Re: [amsat-bb] FT-857 and Omnirig",
    "date": "2019-01-05T02:45:34Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/7VH2RLW3UH5LSYTDDUMG6WZXWCUVZ5G7/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/F3GXBGEIEGQ4ZLUVNVHYL7CVXKV2FJID/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "On the \"Satellite Tracking\" window, please click the \"Satellites\" menu at\nthe top.\n\nIn the \"Name\" box, scroll down to the satellite you're working with.  Make\nsure that the RX & TX frequencies there are fully spelled out in Hz (no\ndecimals!)\n\nClick Add/Modify so that any changes you make become the active settings\nfor that satellite.\n\nBack on the main \"Satellite Tracking\" window, check the box for \"Use\nOmniRig\".  Then click the \"UP + DN\" button.\n\nWhen I follow those steps, my FT-857 is automatically put into SPLIT mode\nwith one VFO tracking the uplink freq and the other tracking the downlink\nfreq specified in PSTRotator.\n\n(FYI, I always manually check on the FT-857's menus to verify that the VFO\nbeing used for transmit has the CTCSS enabled and at the correct frequency\n--- I don't depend on PSTRotator to set that automatically.  In other\nwords, I let PSTRotator change the up & down freqs but I still manually set\neverything else such as CTCSS, power, mode, etc.)\n\n-Scott,  K4KDR\n\n===========================\n\nOn Fri, Jan 4, 2019 at 9:21 PM NA1SA Loon <[email protected]> wrote:\n\n> I'm using PstRotator with Omnirig to control my new FT-857D.  I managed to\n> get the computer and radio to connect, but I cannot get the TX and RX\n> frequencies to display on the OmniRig side of PstRotator,  My settings\n> are...\n> Rig Type: FT-857\n> Port: COM 3\n> Baud Rate: 4800\n> Data Bits 8\n> Parity: None\n> Stop Bits: 1\n> RTS: Low\n> DTR: High\n> Poll int ms: 500\n> Timeout: 4000\n>\n> When in connects to the radio it only shows the RX frequency in OmniRig\n> and it keeps changing the radios VFO to display a shortened frequency\n> number... instead of 145.950 it shows 145.95.   I then get a TX ERROR msg\n> when you push the PTT and I end doing a reset to get the radio out of this\n> mode.  I'm stumped...\n>\n> Loon\n",
    "attachments": []
}