Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6IRDI2455N4ZYBMV4C7A7WTTCNGIHQUJ/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "001801c74a71$1353d710$0500a8c0@parents",
    "message_id_hash": "6IRDI2455N4ZYBMV4C7A7WTTCNGIHQUJ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/NYHRIF5HSZOQRSCQHQ6DCQNIGR2KZCVP/",
    "sender": {
        "address": "ka3hsw (a) earthlink.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "George Henry",
    "subject": "[amsat-bb] Re: AO-07 RX  -  TX  more questions...",
    "date": "2007-02-07T04:33:11Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VESZNFS2WQAZIBNXSQ4RQPQWC7FCF7VO/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I used to operate RS-10/11, RS-12/13, and RS-15 with a Drake T-4XB driving a \nDrake TC-2 transmit converter, putting out about 40 watts to a homebrew \nturnstile (later, to an Eggbeater), and the matching Drake R-4B and a simple \ndipole in the attic (no preamp) for the mode A downlink.  Also had the Drake \nSC-2 receive converter for modes T and KT...  Made lots of Q's with some \npeople who were very amused at my \"hollow state\" station!  Not sure if your \nAllied receiver is quite as stable as the R-4B was after it had warmed up \nfor a half hour or so, but hey, my first SSTV and RTTY SWL'ing was with an \nold Hallicrafters S-41G (talk about drift...) and a Radio Shack Color \nComputer...\n\n73,\nGeorge, KA3HSW\n\n\n----- Original Message ----- \nFrom: \"Tyler Harpster\" <[email protected]>\nTo: <[email protected]>\nSent: Tuesday, February 06, 2007 9:49 PM\nSubject: [amsat-bb] AO-07 RX - TX more questions...\n\n\n> With my ARR 28 MHz preamp sitting here beside me and plenty of plans for\n> antennas, I have a few more questions:\n>\n> 1)  Can I really pick up AO-7 with my antique Allied Communications tube\n> receiver if I put the preamp at the antenna?\n>\n> 2)  How much EIRP do I need on the uplink?  Can I use my IC-706 barefoot, \n> or\n> am I looking at a Mirage amp?  I think the 706 puts out 50 watts on 2\n> meters.  I'd probably be using a 3 element beam for uplink with something\n> like 9? db gain.  I think I saw something like a 90 watt EIRP would be\n> sufficient for the uplink.\n>\n> Thanks for everyones help so far!\n>\n> 73 DE KM3G\n> Tyler\n>\n> 3)  Do I really gain a few more db in gain if I suffer while I put the\n> antenna up in the supercold weather here in PA, or is that just an urban\n> myth?   :-)\n>\n>\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb \n\n",
    "attachments": []
}