Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6RUNGKH3YKKTLHGHMCNU5DHTOU5ZFB2Y/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "6RUNGKH3YKKTLHGHMCNU5DHTOU5ZFB2Y",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/67REQ4PBW5YKWW5OKMKXB2AXDBV3OCJ2/",
    "sender": {
        "address": "billdz.geo (a) yahoo.com",
        "mailman_id": "cf72c3fefd9647e5b0216b2b0300c538",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/cf72c3fefd9647e5b0216b2b0300c538/emails/"
    },
    "sender_name": "Bill Dzurilla",
    "subject": "[amsat-bb] Re: How to mount sat antenna on camera tripod?",
    "date": "2008-02-20T04:39:27Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/GV36EMCQO52JLSMDMMFNIF7X7I7QGHMW/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "The little spikes that hold the T-Nut to the boom are\npretty short.  What about using some other means to\nreinforce the boom's hold on the nut?  Could try\nsupergluing the nut to the boom, but that might not be\nstrong enuf.  Perhaps drill a hole in a small piece of\naluminum, place the aluminum over the T-Nut with the\ndrilled hole over the threaded hole on the nut, then\nsecure the aluminum to the boom with a couple of wood\nscrews?\n73,\nBill NZ5N\n--- Scott Richardson <[email protected]> wrote:\n\n> > Scott, how big of an antenna?  Was the T nut at\n> the\n> > balance point?  What's your plan B?\n> \n> I just put together a 3-el 2m WA5VJB to go with an\n> 8-el on 70cm, then bolted \n> the two together end to end in the same plane. I put\n> the T nut a little bit \n> off the balance point (silly mistake). But even if\n> balanced, just the aiming \n> of the antenna would surely have pulled the nut out.\n> Maybe my old scrap 1x1 \n> is too soft.\n> \n> Plan B was suggested by Steve VA3SAX, but I'd still\n> like to find a more \n> rugged alternative.\n> \n> So far I've sunk less than $10 into the two antennas\n> and would love to keep \n> it below that mark.\n> \n> 73, Scott N1AIA\n> \n> \n\n\n\n      ____________________________________________________________________________________\nNever miss a thing.  Make Yahoo your home page. \nhttp://www.yahoo.com/r/hs\n",
    "attachments": []
}