Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6VHW3S64YHACOICDN46GPUVTCR55N2NV/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "000b01ca21bb$deaa8ac0$d616ba89@donaldro",
    "message_id_hash": "6VHW3S64YHACOICDN46GPUVTCR55N2NV",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/C5DU5CWF3TL2JEVTWPE37JN7CFZE5QP3/?format=api",
    "sender": {
        "address": "dmroland (a) ca.inter.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Don Roland",
    "subject": "[amsat-bb] Re: KLM 2M 22C",
    "date": "2009-08-20T17:29:30Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/C5DU5CWF3TL2JEVTWPE37JN7CFZE5QP3/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi Luc,\n\nI've assembled several of these antennas and never found a problem.\nI would suspect assembly error;  page 7 of the manual has all\nthe dimensions to verify proper assembly.  there are four columns\nof figures.\n\nThe leftmost column is the distance from the end of the boom\nto that particular element, while the rightmost column is the length of\nthat element. Those 2 columns are for the horizontal elements.\n\nThe middle two columns are the measurements for the vertical plane\nelements.  Again the \"middle-left\" column is the distance from the end\nof the boom, while the \"middle-right\" column is the element length.\n\nThe most likely element(s) to miss mounting are the one(s) that are\nmounted through the balun or tight against the polarity switcher.\n\nIf you don't have the manual let me know and I will get a copy to you.\n\n73 Don -VE1AOE-\n\n\n> I just assemble and \"old\" oscar 1 era KLM 2M 22C beam over the week end to\nended stuck up with one element and no matching pre drilled hole\n> in the boom tube. Did anyone recollect if KLM ever missed pre drilled hole\nin their workmanship? My assembly was on the side of a bit hurry\n> and i will have to recheck al the measurements but with the pre drilled\nbolt holes boom section attachment it is hard to make mistakes but\n> we never know!\n>\n> Thank's for your  inputs?\n>\n\n",
    "attachments": []
}