Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/A4KNBTIOE5HAMTTNSRILZXDJTYA32TIU/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "1229362878.13849.16.camel@kim-desktop",
    "message_id_hash": "A4KNBTIOE5HAMTTNSRILZXDJTYA32TIU",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PHWHUCK43IWUGR3FHDT3YEZTTCQXQBEM/?format=api",
    "sender": {
        "address": "ac7yy (a) comcast.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "AC7YY - Kim",
    "subject": "[amsat-bb]  9K6 with ICOM 7000 and KPC9612+",
    "date": "2008-12-15T17:41:18Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/7TAQGDNFBCXXFR5M3H6IKQMTZ5PI7HB5/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Is anyone using the IC-7000 and a KPC9612+ for 9.6k? I could sure use\nhelp in transmit settings. It receives good and keys the radio via port\n2 on the tnc. The XMITLVL setting are currently at: XMITLVL 100/45. I\nhave jumper J-20 in the default 'ON' position. CD is set at CD\nSOFTWARE/INTERNAL. I had to change from the default INTERNAL to SOFTWARE\non port 1, but port 2 does not need to be to receive? I am wired using\nthe six pin DIN on the back of the radio.\n\nIt works fine on port 1 (1.2k) with the 100 setting. I have tried port 2\nsettings from 1-65 with no luck. 9.6 packets are not being decoded. I\ndon't have access to a service monitor. If someone could point out where\nI am messing up it would be appreciated.\n\nkim - ac7yy\n\n\n\n\n",
    "attachments": []
}