Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/AJUHNKWCGGQN5CRLOMZVHGVTL4IETUL6/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAEMY9FdDAo5KXaOU_yntE8NZurqgUC8aATbR4LWV6k1au_PRtQ@mail.gmail.com",
    "message_id_hash": "AJUHNKWCGGQN5CRLOMZVHGVTL4IETUL6",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/4ESVIYBFA4HCIF3O7ESUDYWX6BQZC6X2/?format=api",
    "sender": {
        "address": "kb1pvh (a) gmail.com",
        "mailman_id": "946baa6fd780451aa988d177f6f74dbd",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/946baa6fd780451aa988d177f6f74dbd/emails/?format=api"
    },
    "sender_name": "Dave Webb KB1PVH",
    "subject": "Re: [amsat-bb] Question about SatPC32 Auto satellite switching",
    "date": "2020-01-02T19:24:12Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4ESVIYBFA4HCIF3O7ESUDYWX6BQZC6X2/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/K6Y3AAK3OK2IEY7PSIJWT7RSC23SJNJR/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Tom,\n\nYou need to edit Prior.sql.\n\n>From the manual...\n\n*3. Prior.SQF*\n\nThe program performs automatic satellite switching for satellites with a\npriority setting. This works as follows: If no priority satellite is in\nhearing range, the program switches to a priority satellite as soon as that\nsatellite's elevation reaches the minimum elevation angle, provided the\nsatellite effectively comes into hearing range.\n\nIf during the hearing range of a priority satellite, another one with\nhigher priority shows up, the program switches to that one, but only at\nelevation 0 to avoid reception time losses. If a priority satellite reaches\nLOS, the program switches to a lower priority satellite, provided it is in\nhearing range.\n\nThe file contains the names and priority degree of the satellites with a\npriority setting. A maximum of 9 satellites can be entered. The satellite\nwith the highest priority 1 has to be first in the list, the satellite with\npriority 2, second etc. If the program is used in conjunction with WiSP,\npriority settings in both programs have to be the same.\n\nDave-KB1PVH\n\n\nSent from my Galaxy S9\n\nOn Thu, Jan 2, 2020, 2:19 PM Thomas Schaefer via AMSAT-BB <\[email protected]> wrote:\n\n> There is a feature to automatically switch to the next satellite. I have\n> it enabled (A+ in commands).\n>\n> But when a satellite goes past LOS, it does not switch to next. Is the\n> idea that is will switch to the next one at AOS?When I say it does not\n> switch, the frequency and active sat / letter does not change.\n>\n> Is the program supposed to change automatically to the next satellite in\n> the list of upcoming passes?\n>\n> Thanks,\n>\n> Tom NY4I\n> Blog: www.ny4i.com\n> Madeira Beach, FL (Grid: EL87ot)\n>\n>\n>\n>\n> _______________________________________________\n> Sent via [email protected]. AMSAT-NA makes this open forum available\n> to all interested persons worldwide without requiring membership. Opinions\n> expressed\n> are solely those of the author, and do not reflect the official views of\n> AMSAT-NA.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb\n>\n",
    "attachments": []
}