Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ANOR6KNS3YRSFUCZLJWUKLPBFRZU3CTK/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "011701c844b7$ad6ee8d0$0300a8c0@billslaptop",
    "message_id_hash": "ANOR6KNS3YRSFUCZLJWUKLPBFRZU3CTK",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ANOR6KNS3YRSFUCZLJWUKLPBFRZU3CTK/?format=api",
    "sender": {
        "address": "billbruno (a) earthlink.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Bill Bruno",
    "subject": "[amsat-bb]  5400B Rotor Problem",
    "date": "2007-12-22T16:28:24Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/P5XYZOOJTC6JLEKDSZJRAVU6AYEJ6RL6/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "First, many thanks to W7PN, VE4YZ and W0SAT for their help in \ntroubleshooting my rotor problem.\nProblem: Both az and el indicators moved to just past the mid position with \nthe rotors  moving full travel ( They moved all the time the rotors were \nmoving but at a slower rate).\nBoth indicators have the same circuitry differing only in the scale on the \nface plates so  all voltage readings should be the same for both az and el. \nMine were.\nOn the back of the controller, terminal 1 should read a constant 6 vdc. \nTerminals 2 and 3 voltages will vary according to rotor position but  added \ntogether should total 6 v.\nMy terminal 1 reading was 3.2 v, approx half what it should be.\nFollowing  the circuit back towards the voltage regulator, R9 and R10 also \nboth read 3.2 v ( should be 6 v). At the voltage regulator (Q2 on the \ndiagram, Part # ua7806c) readings should be approx 16 v on the input pin, 6v \non the output pin, with the center pin ground. My readings were 16 v in, 3.2 \nv out, center pin ground, isolating the problem to the voltage regulator.\nI hope this info can be of use to others.\nBill KB2RC\nAmsat 6986 \n\n\n",
    "attachments": []
}