Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/APR7ZOBTZ2FTXKI7FHM3TSGXN6BRMSO4/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "56746F98604F4B1BBD8D9D79931C96D1@m9080n",
    "message_id_hash": "APR7ZOBTZ2FTXKI7FHM3TSGXN6BRMSO4",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/APR7ZOBTZ2FTXKI7FHM3TSGXN6BRMSO4/",
    "sender": {
        "address": "w5rkn (a) amsat.org",
        "mailman_id": "ff01b14b84774866a41c46bed944537d",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/ff01b14b84774866a41c46bed944537d/emails/"
    },
    "sender_name": "Ronald G. Parsons",
    "subject": "[amsat-bb]   Re: IC-910H low audio problem.",
    "date": "2009-06-09T12:44:22Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HKUP5PAVK5CFB7FKVDWIIRSPD2NPUO7C/"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I discovered this with my 910H. If you compare the schematic with an older \nIcom transceiver, say the IC-756, you will notice that the voltage divider \non pin 8 decreases the audio on that pin by a factor of about 50 from the \nIC-756!\n\nI thought of two \"cures\":\n\n1. Modify the radio by replacing the offending resistor.\n2. Modify my headset by bringing the line that would go to pin 8 outside the \nmic connector and run it to a 1/4\" phone plug.\n\nI chose 2. I plug the phone plug into the nearby headphone jack when I use \nthe headset, or pull it out to use the speaker. Works on both my 910 and \n756.\n\nI was told by a person at Heil that Icom made that change to better use a \nTNC with the mic connector on the 910.\n\nRon W5RKN\n\n> Date: Tue, 9 Jun 2009 05:21:35 +0300\n> From: Kostas Ioannidis <[email protected]>\n> Subject: [amsat-bb]  IC-910H low audio problem.\n> To: [email protected]\n> Message-ID:\n> <[email protected]>\n> Content-Type: text/plain; charset=ISO-8859-1\n>\n> According to the IC-910H manual, pin number 8 at the mic connector is\n> audio output (which varies according to af control). I connected a\n> pair of headphones at the pin but the audio is way to low and cannot\n> be used for listening.  Is it normal? I thought that it was designed\n> for this purpose. Am I missing something in the menus? Thanks in\n> advance!\n>\n>\n> 73 de SW1IXP, Kostas Ioannidis\n>\n\n\n",
    "attachments": []
}