Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/AZK4RQIQM36TOBHKSZFFXWDJPIBCZG6Y/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "CAB4zG_+ozFK-_h93PZ8ovWc+Pb0xePHsTJ16hMQ9cfKi-DS0FA@mail.gmail.com",
    "message_id_hash": "AZK4RQIQM36TOBHKSZFFXWDJPIBCZG6Y",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/AZK4RQIQM36TOBHKSZFFXWDJPIBCZG6Y/",
    "sender": {
        "address": "mikesprenger (a) gmail.com",
        "mailman_id": "734f616e776b4650b504d0531be12536",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/734f616e776b4650b504d0531be12536/emails/"
    },
    "sender_name": "Mike Sprenger",
    "subject": "[amsat-bb] For Sale 2m - 10m transverter",
    "date": "2015-01-24T20:51:59Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "For Sale:  (Too much stuff laying around, this transverter works fine)\n\nTen-Tec 1210A 2 Meter transverter for sale - $100 (plus shipping)\n\nDetails:\nhttp://www.tentecwiki.org/webarchive/1210/\n\nAllows you to get on 2 Meters (all mode, transmit and receive) from a 10\nmeter rig (even the HF Flex DSP radios). With a Flex it allows you to \"see\"\nthe activity output from 2m passband of a satellite.\n\nAlso worked great with the Icom IC-703+ for 2m capability.\n\nFull 10 watts RF output. ALC-controlled 10M input handles power range of 4\nto 20 watts. Solid-state T-R switching. Engineered for optimized l0M-2M\nconversion performance. 1.5\"H x 5 \"W x 8\"D.\n\nThis is a Factory Built transverter (not the kit version)\n\nContact Mike W4UOO if interested.\n\n\n*Model 1210 Specifications:*\n\n   - *Frequency Coverage: 144-148 MHz band, typically 144-145.7 MHz, based\n   on 28-29.7 MHz tuning range of most 10 meter transceivers. 116 MHz local\n   oscillator.*\n   - *Power requirement: 12-14VDC, 100 mA. receive, 600 mA in transmit with\n   no drive, 2.0A on transmit at 10 watts output.*\n   - *Construction: Black texture painted clamshell-type steel top and\n   bottom, aluminum panel chassis and heatsink. One 5.5 \"X 3.75\" double-sided\n   circuit board.*\n   - *Semiconductors: 2 IC's, 13 transistors, 25 diodes. RF final. BLW81.*\n\n*TRANSMIT:*\n\n   - *RF Output: 10 watts maximum an CW and FM, 10 watts PEP on SSB.*\n   - *T/R Switching: solid state, RF sensing.*\n   - *Output Power Adjustment Range: 2 to 10 watts.*\n   - *Spurs and Harmonics: Greater than -56 dBc at 10 watts out.*\n   - *Standard TX Hang Time: Approximately 1 second.*\n   - *Input Drive: Less than 0.5 watts input to key TX mode. 4 watts input\n   for 10 watts output. Input drive level is ALC controlled between 4 and 20\n   watts. Input SWR less than 1.5:1.*\n\n*RECEIVE:*\n\n   - *Noise figure: less than 7 dB.*\n   - *Conversion Gain: Approximately 17 dB.*\n   - *Image Rejection: Greater than 60 dB.*\n   - *Input Intercept: -6.5 dBm typical.*\n",
    "attachments": []
}