Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/BIRS6ZQQBOX4A7KOXS5AV7JZFKKX4IIV/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "BIRS6ZQQBOX4A7KOXS5AV7JZFKKX4IIV",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/BIRS6ZQQBOX4A7KOXS5AV7JZFKKX4IIV/",
    "sender": {
        "address": "n4zq (a) yahoo.com",
        "mailman_id": "c4aa163d672e4298b1ca810848ebe844",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/c4aa163d672e4298b1ca810848ebe844/emails/"
    },
    "sender_name": "Keith O'Brien",
    "subject": "[amsat-bb] Re: FASTRAC 1 Digipeating?",
    "date": "2011-12-03T13:33:42Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "\n\nClayton Coleman W5PFG wrote:\n\nAnyone else try to send packets via FASTRAC 1 on the most recent two\npasses late evening over North America?  I only received the CW beacon\nand one burst of telemetry on each of the two passes over East Texas.\nI did notice on the first pass that my Keplerian elements were off by\na little bit but had corrected it in time for the second pass around\n05:15 UTC 3-12-2011.  I tried both 1200 and 9600 packet to no avail.\n\n73\nClayton\nW5PFG\n\nShortly after I read the announcement on Thursday that FAST1 (AKA Sara Lilly)\nwas going to be put into the Digipeat mode, I plugged it into Satpc32 and saw\nwhere I had a pass in 10 minutes for about 10 minutes. Here is what I was able\nto get through and copy with 1200 baud packet on that December 1 pass around 14:50 UTC.\n145.825 up and 437.345 down +- Doppler...\n\nFm N4ZQ To APRS Via FAST1 <UI pid=F0 Len=68 >[09:50:19]\n=2803.56N/08246.28W`UISS-AGWPE-ORBITRON & UISS-ORB SOFTWARE {UISS52}\n\nFm N4ZQ To APRS Via FAST1* <UI pid=F0 Len=68 >[09:50:21]\n=2803.56N/08246.28W`UISS-AGWPE-ORBITRON & UISS-ORB SOFTWARE {UISS52}\n\nFm N4ZQ To APRS Via FAST1 <UI pid=F0 Len=68 >[09:50:33]\n=2803.56N/08246.28W`UISS-AGWPE-ORBITRON & UISS-ORB SOFTWARE {UISS52}\n\nFm N4ZQ To APRS Via FAST1* <UI pid=F0 Len=68 >[09:50:36]\n=2803.56N/08246.28W`UISS-AGWPE-ORBITRON & UISS-ORB SOFTWARE {UISS52}\n\nFm N4ZQ To APRS Via FAST1 <UI pid=F0 Len=68 >[09:50:48]\n=2803.56N/08246.28W`UISS-AGWPE-ORBITRON & UISS-ORB SOFTWARE {UISS52}\n\nFm FAST1 To KE5DTW <UA >[09:50:56]\nFm FAST1 To KE5DTW <I R0 S0 pid=F0 Len=34 >[09:50:56]\nFAST1 Is Now Connected. GO HORNS!\n\nFm FAST1 To KE5DTW <I R0 S0 pid=F0 Len=34 >[09:51:01]\nFAST1 Is Now Connected. GO HORNS!\n\nFm FAST1 To KE5DTW <I R0 S1 pid=F0 Len=7 >[09:51:01]\nfast1> \n\n..............\n\nThat's all she wrote... .  Haven't been able to Digi through it since. Only\na few telemetry frames have been copied to date. Maybe the battery was\ndepleted enough to cause the reset they were looking for.. To bad we couldn't \nswap AO-51 batteries with them... \n\nKeith N4ZQ\n",
    "attachments": []
}