Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/BWKE27L2UPYFC272GU36LIIAA56FNAMT/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "BWKE27L2UPYFC272GU36LIIAA56FNAMT",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/IS4DWTARDXYVWUYRTO4KKOZUQGEYXPRF/?format=api",
    "sender": {
        "address": "db (a) db.net",
        "mailman_id": "968ba4db95324dc4a6e0d2e889d5d6bf",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/968ba4db95324dc4a6e0d2e889d5d6bf/emails/?format=api"
    },
    "sender_name": "Diane Bruce",
    "subject": "[amsat-bb] Re: Using the Arrow ant.",
    "date": "2007-08-19T22:32:46Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/IS4DWTARDXYVWUYRTO4KKOZUQGEYXPRF/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "On Sun, Aug 19, 2007 at 05:49:02PM -0400, [email protected] wrote:\n> For WB2LLP and others,\n...\n>\n> There is a standard 1/4\" bolt on the tripod that is normally used to screw\n> into a camera.  The Arrow has a hole that accepts a 1/4\" bolt.\n\nIt's usually hidden under the black sponge handle, so that needs to\nbe slid off to find that hole. It's not a real problem pushing that off\nand then back in, except the diplexer is _inside_ the end of the square\ntubing, one has to be careful not to damage things.\n\n>\n> The problem with this is that the Arrow will tip over the whole thing\n> because it extends far forward and unbalances the tripod.  So, instead of\n\nI like the other posters idea of extending the arrow with a bit of\na broom stick, you could then counter balance it nicely.\n\n> screwing the ant onto the bolt, put a 1\" threaded bushing on the bolt, and\n> put a photographic C-clamp holder into the other side of the bushing.  The\n> holder also has a 1/4\" bolt.  Then the Arrow (or some other ant.) just gets\n> center mounted in the C-clamp.  There's no apparent diminution of the\n> Arrow's effectiveness.\n\nThis is a nice idea too, it means not having to slide the handle off.\n\n\n>\n> Hope this is helpful to some.  It returns at least 1 hand to use in logging!\n\nThanks for the tips!\n\n- Diane VA3DB\n--\n- [email protected] [email protected] http://www.db.net/~db\n",
    "attachments": []
}