Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/BZFY7HHG64KNLRRXOYWLH43AUUHCQ3FH/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "002401cc4c4a$50eb23a0$f2c16ae0$@net",
    "message_id_hash": "BZFY7HHG64KNLRRXOYWLH43AUUHCQ3FH",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/2MA2DAL7TO6JE4RP2SMYONRY4YS6GR6X/?format=api",
    "sender": {
        "address": "kb2m (a) comcast.net",
        "mailman_id": "4f01ae6749a54d178a501e4efec2da0b",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4f01ae6749a54d178a501e4efec2da0b/emails/?format=api"
    },
    "sender_name": "Jeff KB2M",
    "subject": "[amsat-bb] Re: G5500 az el issue resolved!",
    "date": "2011-07-27T10:45:34Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/QWW2LNHBGCX64XEBDKXXYUKJPJQMBJWO/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/MDE53FVJ3HYZOAMTKB4HPFLZJBAJTNZZ/?format=api",
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/TOPGRXV4CWBBKWLEGWQVQQDCWUQ44547/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": " Thanks to all for the refresher on the 5500 repair. I replaced the 17806P\n(which I think has a 6v output)  with a 7805. This fixed the problem. I had\nto recalibrate as my max readings in the SatPC32 rotor calibration routine\ndropped because of the assumed lower output voltage of the 7805 regulator. I\ncould only get a max azimuth reading of 206, somewhat less than the 255\nneeded, but this seems to work ok. \n \n Does anyone know a source for a replacement bulb in the display? Both my\nbulbs are burned out and I would like to replace them with something I can\nobtain locally. Thanks again for all the help...\n\n73 Jeff kb2m\n  \n\n",
    "attachments": []
}