Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/C5JSRJEYJ2W65JMTWC3SLO4SYLP4PH4U/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CADDbS5B4ERu908RR+fkxVNxYeFNh7B3kqOjVpWSi7ZQMMk40Tg@mail.gmail.com",
    "message_id_hash": "C5JSRJEYJ2W65JMTWC3SLO4SYLP4PH4U",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/C5JSRJEYJ2W65JMTWC3SLO4SYLP4PH4U/?format=api",
    "sender": {
        "address": "k0jm.mark (a) gmail.com",
        "mailman_id": "4fa2bb5eca934ca4b14c4ede20ff0c9a",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4fa2bb5eca934ca4b14c4ede20ff0c9a/emails/?format=api"
    },
    "sender_name": "Mark Johns, K0JM",
    "subject": "[AMSAT-BB] Re: Backwards TX/RX with SATPC32 on IC-9700",
    "date": "2024-01-06T15:27:48Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "It appears that you may have entered the frequencies in reverse order in\nDoppler.SQF. See https://www.amsat.org/doppler-sqf-line-generator/\n--\nMark D. Johns, KØJM\nAMSAT Ambassador & News Service Editor\nBrooklyn Park, MN USA   EN35hd\n-----------------------------------------------\n\"Heaven goes by favor; if it went by merit,\n   you would stay out and your dog would go in.\"\n    ---Mark Twain\n\n\nOn Sat, Jan 6, 2024 at 9:17 AM Glen Jenkins via AMSAT-BB <[email protected]>\nwrote:\n\n> Hello,\n>\n> I am new to satellite operation, having just installed SATPC32 on my PC\n> for my IC-9700.\n> I am using the latest document : \"Amateur Satellite Frequency Guide\" from\n> AMSAT dated May 2023 for my data.\n> The attached image CAS-4B and SATPC31 Display shows that the data sent by\n> SATPC32 to the IC-9700 does not match the satellite data. One its is\n> backwards and two, the data itself is not matching here. Do I have\n> something setup incorrectly on the software or in my IC-9700, ? If so, what\n> do I need to correct.\n>\n> It appears to me that the RX and TX frequencies for the satellites are\n> backwards on the IC-9700 as set by SATPC32. The bands are switched for Rx\n> and Tx.\n> SATPC32 shows DOWNLINK as 145.925, and TX Uplink as 435.277 right now on\n> its top data line.\n> YET the IC9700 is getting sent as RX on 435.650 MHz (top of display) and\n> TX on the bottom of the display it shows 145.990 with a \"TX\" indicator next\n> to it.\n> So it's backwards, RIGHT?\n>\n> I see the same issue of backwards Rx and Tx on the IC-9700 on these other\n> Satellites set by SATPC32:\n> AO-73,\n>\n> Then:\n> AO-91, The Data on the display CAT Tuning shows \"145960/435250 FM/FM\"\n> which matched the AMSAT data. If I click \"Execute\", I get and Error\n> \"Please, enter a valid RX frequency\". Why? When I click OK on that error,\n> and then click on \"Continue\" the rig does show the correct Rx and TX data\n> settings.\n>\n> On AO-109, there is NO FREQUENCY data on the CAT Tuning, Does that mean\n> that the Satellite is missing from the nasa satellite data file?\n>\n> Thank you for the help, and if anyone wants to call me and walk me through\n> my errors and fixes, just email separately to [email protected] (mailto:\n> [email protected])\n>\n> 73s\n> Glen Jenkins, P.E.\n> WB4KTF\n> Austin, TX\n>\n> -----------------------------------------------------------\n>\n> Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available\n> to all interested persons worldwide without requiring membership. Opinions\n> expressed\n> are solely those of the author, and do not reflect the official views of\n> AMSAT-NA.\n> Acceptable Use and Privacy Policies available at\n> https://www.amsat.org/about-amsat/\n>\n> View archives of this mailing list at\n> https://mailman.amsat.org/hyperkitty/list/[email protected]\n> To unsubscribe send an email to amsat-bb-leave(a)amsat.org\n> Manage all of your AMSAT-NA mailing list preferences at\n> https://mailman.amsat.org\n\n\n",
    "attachments": [
        {
            "email": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/C5JSRJEYJ2W65JMTWC3SLO4SYLP4PH4U/?format=api",
            "counter": 2,
            "name": "attachment.html",
            "content_type": "text/html",
            "encoding": "utf-8",
            "size": 4330,
            "download": "https://mailman.amsat.org/hyperkitty/list/[email protected]/message/C5JSRJEYJ2W65JMTWC3SLO4SYLP4PH4U/attachment/2/attachment.html"
        }
    ]
}