Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/COWGNCLT7VFGZCSFPPTKZG47CJTEHEAF/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "COWGNCLT7VFGZCSFPPTKZG47CJTEHEAF",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/XTPV5PHEZWKCPDDQ3KIYIJU2S3IJTZUB/?format=api",
    "sender": {
        "address": "erich.eichmann (a) t-online.de",
        "mailman_id": "6679c7cde510458f8117afd8289f9948",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6679c7cde510458f8117afd8289f9948/emails/?format=api"
    },
    "sender_name": "Erich Eichmann",
    "subject": "Re: [amsat-bb] Icom CI-V programming",
    "date": "2018-12-30T08:29:26Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/XTPV5PHEZWKCPDDQ3KIYIJU2S3IJTZUB/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/M3YZYT67HSIZFY2YYLWXDF43ZELKP7SM/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Mike,\nbefore you send a command to one of the VFOs (set/read frequency and \nmode, Ctcss-tone etc.) you have to send a command that speciefies the \nVFO to which the following command(s) will be sent. The specified VFO \nwill automatically accept VHF, UHF and L frequencies  (if you have that \nmodule). The command and sub command bytes for the IC-910H in \nnon-satellite mode are: VFO A: 07 00, VFO B: 07 01. Satellite mode Main \nVFO: 07 D0, Sub VFO: 07 D1. Of course, you need  to send always the \ncomplete command string incl. header and FD as terminator, see manual p. \n78/79.\n\nTo switch bands send the command bytes 07 B0. As Mark, N8MH, mentioned \nalready: You don't need to switch anything manually.\n\n73s, Erich, DK1TB\n\nAm 29.12.2018 um 22:18 schrieb Mike Diehl:\n> I’m currently working on some projects that will implement CI-V control of my rig, an Icom IC-910H without the L band module. After a few struggles with the manual being either wrong or missing information I’ve run into what could be a potential problem later. When using command 0x00 to set the frequency, the rig will not switch bands on its own. Whether this makes sense or not is debatable and I have a couple possible workarounds, some uglier than others. I can either read the bands that Main and Sub are on and send my 2m and 70cm frequency to the correct place (elegant) or I can send them both the same frequencies and let the rig sort it out (ugly). Now comes the tricky part. I don’t have the L band module yet but when I do, how am I supposed to get the rig to switch from say L/v to U/v if it doesn’t auto switch bands?\n>\n> I’m not seeing any commands to handle this situation. Does anyone know if there is an undocumented command or some other type of workaround? I would also be curious what users of SatPC32 experience when they switch between L/v and U/v. Do you manually have to switch bands to regain frequency control or does the IC-910 become smart enough to switch on its own when the module is installed?\n>\n> Any insight into this would be greatly appreciated.\n>\n> 73,\n> Mike Diehl\n> W8LID/VE6LID\n> _______________________________________________\n> Sent [email protected]. AMSAT-NA makes this open forum available\n> to all interested persons worldwide without requiring membership. Opinions expressed\n> are solely those of the author, and do not reflect the official views of AMSAT-NA.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb\n\n\n",
    "attachments": []
}