Show an email

GET /hyperkitty/api/list/[email protected]/email/CSKT2SWXYFJVHKB5A327CF6E2WBOK2QZ/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/CSKT2SWXYFJVHKB5A327CF6E2WBOK2QZ/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAAJiE8PG5=uYMwfsa077Xd5oetN38gFmzosWhYtPw2=FPkmEaw@mail.gmail.com",
    "message_id_hash": "CSKT2SWXYFJVHKB5A327CF6E2WBOK2QZ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/CR4FDWUG6WILVXKB2W6G2YJCQPOJGQIZ/?format=api",
    "sender": {
        "address": "kb2ysi (a) gmail.com",
        "mailman_id": "1ea455b723224992934ae02082411602",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/1ea455b723224992934ae02082411602/emails/?format=api"
    },
    "sender_name": "Don KB2YSI",
    "subject": "Re: [amsat-bb] Unsuccessful Uplinks - AO-92",
    "date": "2018-06-07T14:02:04Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/CR4FDWUG6WILVXKB2W6G2YJCQPOJGQIZ/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/LYT3OUI6DCJENKW7V7JKPOZAZ62EO6W2/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Full duplex without desensitization rules, I never knew how much until I\nput a MFJ-916B into my setup.\n\nI have a few pictures and a diagram on my hamqth.com/KB2YSI page if anyone\nis interested.\n\n73, Don KB2YSI\n\nOn Thu, Jun 7, 2018, 09:28 [email protected] <[email protected]> wrote:\n\n>\n> Drew KO4MA, is absolutely right, operating full duplex is the best way to\n> work these satellites.\n>\n> Having said that, I was stumped once when I heard the AO-92 downlink \"full\n> quieting\" for the entire pass but could not get into the uplink. Strangely\n> enough, I heard only 2 stations calling and no one responding.\n>\n> It was pretty frustrating, making me doubt everything I had learned so\n> far.  Then one day, I found out (right here on this BBS) that the satellite\n> switches to L/V mode, then it all made sense. Now I always check the\n> current status page at AMSAT.ORG especially when operating AO-92.\n>\n> I also learned about why it difficult to get into AO-85 with a HT.  Keep\n> reading, you'll learn a lot here from the gurus... trust me :)\n> Good luck on the next pass...\n>\n> 73!Umeshk6vug\n>   ------------------------------\n>\n> Message: 12\n> Date: Wed, 6 Jun 2018 20:25:49 -0400\n> From: \"Andrew Glasbrenner\" <[email protected]>\n> To: \"'Hugo Dominguez, Jr.'\" <[email protected]>,    <[email protected]>\n> Subject: Re: [amsat-bb] Unsuccessful Uplinks - AO-92\n> Message-ID: <[email protected]>\n> Content-Type: text/plain;    charset=\"UTF-8\"\n>\n> You've discovered one of the reasons full duplex is best on the FM\n> sats...you have no idea if you are getting through, because you can't hear\n> while transmitting.\n>\n> Got another radio so you can work full duplex?\n>\n> 73, Drew KO4MA\n>\n> -----Original Message-----\n> From: AMSAT-BB <[email protected]> On Behalf Of Hugo Dominguez,\n> Jr.\n> Sent: Wednesday, June 06, 2018 7:41 PM\n> To: [email protected]\n> Subject: [amsat-bb] Unsuccessful Uplinks - AO-92\n>\n> I?ve just started playing with talking on satellites. I?m able to hear all\n> the satellites (AO-85, AO-91, AO-92 and SO-50) that I have programmed on my\n> Kenwood TH-D74, which I use with my Elk dual band periodic log antenna.\n> However no one can hear me or responds to me. I?ve only been successful\n> with my uplink (being heard) on AO-91 on several passes. I triple checked\n> my frequencies on my radio and the 67 Hz tone and they are set as follows:\n> Sat.        Xmit      Tone\n> SO-50  145.850  67.0 Hz\n> AO-85  435.170  67.0 Hz\n> AO-91  435.250  67.0 HZ\n> AO-92  435.350  67.0 Hz\n> These are the frequencies used when the bird is at its peak. I adjust for\n> doppler on 440 by starting out 10 khz less, e.g AO-85 435.160, 435.165,\n> 435.170, 435.175, 435.180.\n>\n> Any ideas if something has changed from what is published or am I missing\n> something? Like I said, i?ve been able to communicate on AO-91.\n>\n> ?\n> Hugo Dominguez, Jr.\n>\n> ------------------------------\n>\n>\n> _______________________________________________\n> Sent via [email protected]. AMSAT-NA makes this open forum available\n> to all interested persons worldwide without requiring membership. Opinions\n> expressed\n> are solely those of the author, and do not reflect the official views of\n> AMSAT-NA.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb\n>\n",
    "attachments": []
}