Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/D44K5Q7OCLI4HEQWITMDU52YMVHH7PWC/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "009101d1b56c$ed6db360$c8491a20$@net",
    "message_id_hash": "D44K5Q7OCLI4HEQWITMDU52YMVHH7PWC",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/D44K5Q7OCLI4HEQWITMDU52YMVHH7PWC/?format=api",
    "sender": {
        "address": "tjschuessler (a) verizon.net",
        "mailman_id": "e00b615eeb1940c790a22f139add6462",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/e00b615eeb1940c790a22f139add6462/emails/?format=api"
    },
    "sender_name": "Tom Schuessler",
    "subject": "[amsat-bb] Cuscraft 416-TB and 22XB phasing harneses???",
    "date": "2016-05-24T03:32:40Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hello all,\n\nI recently acquired a pair of Cushcraft Satellite antennas, the 22XB and the\n416-TB.  Both are Cross fed dual polarity Yagis.  What did not come with\neither of these antennas was the phasing harnesses that were a part of the\noriginal contents.  The two meter 22XB is fed with crossed driven elements\nin the same location on the boom and SO239 connectors in place on the\nantenna.  The 416-TB has direct connections from coax to the driven elements\nand also to the coax balun on each of the driven elements.  The driven\nelements are offset fed so as to provide the natural delay in the one\ndirection.\n\nCushcraft did sell a PS-4 which I believe was a relay controlled switch for\nthe 435Mhz 416-TB but if they sold a 2 meter version, I cannot tell.  I do\nhave a contact at Cushcraft I was given that I will be reaching out to for\nmore information\n\nThe \"Satellite handbook\" does have some description on how to configure a\nfixed harness for the two types of feed orientations.  I am though confused\nto understand how to understand the direction of rotation but that is for\nanother post.\n\nAnyway, does anyone who used to have these antennas or something similar\nhave phasing harnesses, either fixed or switchable that would work with them\nlying around?  I would be interested in acquiring them from you. \n\nThanks and 73.\n\nTom Schuessler, N5HYP\[email protected]\n\nPS. I just picked up a used FT-847 so am looking forward to getting these\nantennas up in the air and seeing how they perform.\n\n\n",
    "attachments": []
}