Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/DLF4KTDK46MKLDQZKC2QLFVZXQTDS72O/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "DLF4KTDK46MKLDQZKC2QLFVZXQTDS72O",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/DLF4KTDK46MKLDQZKC2QLFVZXQTDS72O/",
    "sender": {
        "address": "n0bml (a) brendanleber.com",
        "mailman_id": "90cc4f52e7b04858813d72de83753640",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/90cc4f52e7b04858813d72de83753640/emails/"
    },
    "sender_name": "Brendan N0BML",
    "subject": "[AMSAT-BB] ISS SSTV Reception with GQRX?",
    "date": "2023-10-28T16:55:49Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Greetings!\n\nThis morning I tried to capture the SSTV images from the ISS using GQRX \nwith an RTL-SDR v4 radio without much luck.  My setup is Gpredict to \ntrack the satellite and control the frequency in GQRX, then I pipe the \naudio from GQRX to QSSTV to decode the audio and save the image.  This \nhas worked well in the past during previous SSTV events.  However it's \nbeen a minute and during the 9:18 PT pass this morning I was unable to \ndecode any images.  My cheap Baofeng radio was sitting on the table \ntuned to 145.800 MHz and I heard the transmission clearly so I know the \nISS was transmitting and I was able to receive the signal.\n\nDoes anyone also use GQRX with the RTL-SDR radio?  Can you share screen \nshots of your \"Input\", \"Receiver\", and \"FFT\" settings pages?  I'm \nfinding wildly different information about what to use and would like to \njoin in the fun during this event.\n\nThanks!\nB\n\n-- \n73 de Brendan, N0BML\n",
    "attachments": []
}