Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/DRX24BHKTE3BVSOUDOULZAHMFQU4QLSV/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAMkCmDqa8sGsCoiiJ0ucUX9hp84eK2HUAfwW6QUZDMwLjGjqeg@mail.gmail.com",
    "message_id_hash": "DRX24BHKTE3BVSOUDOULZAHMFQU4QLSV",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/DRX24BHKTE3BVSOUDOULZAHMFQU4QLSV/?format=api",
    "sender": {
        "address": "charlieray (a) gmail.com",
        "mailman_id": "827214bf3d8d45f8b41335a087b8b8e7",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/827214bf3d8d45f8b41335a087b8b8e7/emails/?format=api"
    },
    "sender_name": "Charles Reiche",
    "subject": "[amsat-bb] IC-910h preamp power and inline coax switch.",
    "date": "2018-06-28T20:16:16Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/YHEIQS6YNXJSVTL6U2OSRWYOTEXYJ3Q2/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I am getting up to speed on working NO-84 with my TH-D72a.  My primary\nantenna system and radio is IC-910h with the Icom Preamp installed near the\nantenna.  The 910 powers the preamp through the coax, and I tend to leave\nthe preamp on selection on the radio on all the time.\n\nI want to put a MFJ1702C coax switch inline with the 2m side so I can\nbranch out the 2m antenna to my HT.  The non selected port of the coax\nswitch is grounded.  If you accidentally ground the IC-910's coax with the\npreamp selected on, does it damage the preamp power circuit or is it\ntolerant of a short? I could not find a definitive answer in the manual\nother than the preamp may not activate properly.  I know it wont power up\nthe preamp.\n\nInevitably, if I have to rely on remembering to turn off the preamp before\nI switch to the HT to work NO-84, I will forget. Just want to prevent\nburning something up.\n\nThanks for any suggestions.\n\nN3CRT\nCharles Reiche\n",
    "attachments": []
}