Email Detail

GET /hyperkitty/api/list/[email protected]/email/ED5T5EDPWBTXLMBKZTC54DBB6CLLSTSF/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ED5T5EDPWBTXLMBKZTC54DBB6CLLSTSF/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "em5d23ae8a-9c7e-45b3-a0b7-a81a01700c63@int-station",
    "message_id_hash": "ED5T5EDPWBTXLMBKZTC54DBB6CLLSTSF",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/QGCBFOCUOXSN5B7LN2RTSZZAFMLZGQJV/?format=api",
    "sender": {
        "address": "dibor (a) iname.com",
        "mailman_id": "2d556b4709124873859bd076d89ed525",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/2d556b4709124873859bd076d89ed525/emails/?format=api"
    },
    "sender_name": "Dimitry Borzenko",
    "subject": "Re: [amsat-bb] Spid RAS rotor issue",
    "date": "2018-07-11T13:28:17Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZQKMVDOQNC6UPHINUASFJF24DCPKIOQR/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/JOIO7TPQQ24X5M57UP2F6KPRZAU6SUZK/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi\nGreen Heron controller is good idea but price is as RAS rotator and his \ncontroller.\n\n\n------ Original Message ------\nFrom: \"Dave Webb KB1PVH\" <[email protected]>\nTo: \"kb2m\" <[email protected]>\nCc: \"AMSAT -BB\" <[email protected]>\nSent: 11.07.2018 16:12:01\nSubject: Re: [amsat-bb] Spid RAS rotor issue\n\n>Jeff,\n>\n>I went through 2 Rot2Prog controllers in less than a year. The relays \n>seem\n>to be a big problem. I bit the bullet and bought a Green Heron \n>controller\n>and haven't had any problems.\n>\n>Dave-KB1PVH\n>\n>\n>Sent from my Galaxy S9\n>\n>On Wed, Jul 11, 2018, 8:43 AM <[email protected]> wrote:\n>\n>>Looks like the elevation up relay is fried in my RAS controller box. \n>>I'm\n>>going to take Harald's advice and replace all 4. Before I order the \n>>parts\n>>has anyone else experienced a relay failure with their RAS? If so what\n>>relay\n>>did you replace it with, make, part # ?\n>>\n>>I'm at this time running the controller and rotor at 13.8 volts, was \n>>going\n>>to try 28 volts to the rotor with the Spid approved mod, but now not \n>>so\n>>sure\n>>:-)\n>>\n>>73 Jeff kb2m\n>>\n>>-----Original Message-----\n>>From: Harald\n>>Sent: Tuesday, July 10, 2018 7:07 PM\n>>To: [email protected]\n>>Subject: Re: [amsat-bb] Spid RAS rotor issue\n>>\n>>Hello Kb2m jeff,\n>>\n>>I don't know if you have ELFA over there but from elfa the part\n>>nr. is PCB power relay 12VDC 400mW 137-44-376.\n>>\n>>It is more or less a standard relay.\n>>\n>>They are a littel bit hard to get out of the pcb but I used\n>>solder sucking wick as they called it, you may have to resolder\n>>some points to get it totally free.\n>>Not too much heat, ,,,,take some breaks :-)\n>>\n>>good luck in finding them.\n>>\n>>Harald\n>>la7qta\n>>\n>>\n>>\n>>Wednesday, July 11, 2018, 12:34:25 AM, you wrote:\n>>\n>>\n>> > Hi Harald. thank you for the reply. I'm sure my control box has a \n>>failed\n>> > relay also. I hear a faint click when going both ways in azimuth, \n>>but\n>>only\n>> > hear a click on down elevation. So I'm sure the up elevation relay \n>>is\n>> > defective. I'm going to take your advice and swap out all four \n>>relays.\n>> > Would\n>> > you be so kind to give me a part number and a source of the relays \n>>you\n>> > replaced with. Thanks in advance....\n>>\n>> > 73 Jeff kb2m\n>>\n>>\n>> > -----Original Message-----\n>> > From: Harald\n>> > Sent: Tuesday, July 10, 2018 3:07 PM\n>> > To: [email protected]\n>> > Subject: Re: [amsat-bb] Spid RAS rotor issue\n>>\n>> > Hello Kb2m jeff,\n>>\n>> > I recently had the exact same problem but the rotor was running.\n>> > To get it out of that position I took the plug out of the az\n>> > conn. and put the conn. from ez into az and drove it all the way\n>> > around again. they are equaly pinned. test which way you have to\n>> > rotate with the az buttons,,,,(or connect 12v with the right\n>> > polarity to the ez plug directly),,,,,,, much easyer to use the az \n>>conn.\n>>\n>> > I replaced the 4 relays, zeroed the controller and all is working\n>> > again.\n>>\n>> > The relays are some cheap ones so the best is to change them\n>> > anyway.\n>> > I have used it for 3 years and had truble before with those.\n>>\n>> > Hope this will help in solving your problems !\n>>\n>> > Best 73's\n>>\n>> > Harald\n>> > LA7QTA\n>>\n>> > PS: questions,,,just ask !\n>>\n>>\n>> > Tuesday, July 10, 2018, 12:32:26 PM, you wrote:\n>>\n>> >> I’m having a problem with my RAS rotor at my winter home. When I \n>>turned\n>> >> it\n>> >> on yesterday, after an absence of about 2 months the elevation went\n>>into\n>> >> a\n>> >> complete backflip when powered up, and is jammed against the roof \n>>with\n>>an\n>> >> elevation reading of 195 degrees on the control box.  I’m at my \n>>Florida\n>> >> home for just a few weeks to do some fishing, so before starting to \n>>work\n>> >> on it to maybe speed up the repair process a bit I’m asking here if\n>> >> anyone\n>> >> else had this problem. When the roof dries off I plan on going up \n>>there\n>> >> and remove the antennas before trying to move the rotor, to \n>>diagnose.\n>> >> Right now the azimuth will turn, but the elevation is stuck, it \n>>wont\n>>move\n>> >> up or down. I’m hoping it is just jammed into the roof, once \n>>unstuck\n>> >> hopefully all it would need is a re-calibration. Thanks for any \n>>useful\n>> >> information....\n>>\n>> >> 73 Jeff kb2m\n>>\n>>\n>>\n>>---\n>>This email has been checked for viruses by AVG.\n>>https://www.avg.com\n>>\n>>_______________________________________________\n>>Sent via [email protected]. AMSAT-NA makes this open forum available\n>>to all interested persons worldwide without requiring membership. \n>>Opinions\n>>expressed\n>>are solely those of the author, and do not reflect the official views \n>>of\n>>AMSAT-NA.\n>>Not an AMSAT-NA member? Join now to support the amateur satellite \n>>program!\n>>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb\n>>\n>_______________________________________________\n>Sent via [email protected]. AMSAT-NA makes this open forum available\n>to all interested persons worldwide without requiring membership. \n>Opinions expressed\n>are solely those of the author, and do not reflect the official views \n>of AMSAT-NA.\n>Not an AMSAT-NA member? Join now to support the amateur satellite \n>program!\n>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb\n\n",
    "attachments": []
}