Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/EESGZC65K7LIC5KOHNXM57Y3UCVUYRM7/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "EESGZC65K7LIC5KOHNXM57Y3UCVUYRM7",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/CIB7MHA2B4OPUXB6PFCX4IGYDGC64ESR/",
    "sender": {
        "address": "dphelps1 (a) ameritech.net",
        "mailman_id": "02d31c8abc95431baa6ffe83ac4ec542",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/02d31c8abc95431baa6ffe83ac4ec542/emails/"
    },
    "sender_name": "Douglas Phelps",
    "subject": "Re: [amsat-bb] Fox Delta ST2 interface problem",
    "date": "2014-12-02T20:34:48Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/CIB7MHA2B4OPUXB6PFCX4IGYDGC64ESR/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I use a Fox Delta Interface, with Sat PC 32< with no problems.  The degree readout never changes even 1 degree.  Since mine works, it must be something in your hardware.  I would check the Azmuth and Elevation Pots and use a contact cleaner on them.  I would then check to make sure mu cables are not intermittent.  Mine has worked perfectly for 3 years so I think the problem has to be one of the above.\n\nAlso possible is a cold solder joint, in the Fox Delta, where the Pot lines connect.\n\nDoug\nK9DLP\n\n\n>________________________________\n> From: Tim Goodrich <[email protected]>\n>To: [email protected] \n>Sent: Tuesday, December 2, 2014 12:19 PM\n>Subject: [amsat-bb] Fox Delta ST2 interface problem\n> \n>\n>Hi All,\n>\n>I'm posting this here because the Fox Delta Yahoo group seems to be quite\n>inactive and I haven't received any responses that might fix this problem\n>yet.\n>\n>\n>\n>On my ST2, the azimuth indication doesn't stay at one heading. Instead, if\n>it should be on say 210 degrees, it will rapidly change from 207, to 223, to\n>215, to 205, etc.. Fluctuating within a 15-20 degree range.  After being in\n>contact with Dinesh and having replaced the PIC and crystal, the problem\n>persists. \n>\n>\n>\n>Any ideas of what could be causing this?\n>\n>\n>\n>Thanks,\n>\n>Tim\n>\n>K6TW\n>\n>\n>\n>_______________________________________________\n>Sent via [email protected]. AMSAT-NA makes this open forum available\n>to all interested persons worldwide without requiring membership. Opinions expressed\n>are solely those of the author, and do not reflect the official views of AMSAT-NA.\n>Not an AMSAT-NA member? Join now to support the amateur satellite program!\n>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>\n>\n>\n",
    "attachments": []
}