Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/EO5ANAKTPRYLSWDQ5K4N7VWUZCTADUIZ/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "EO5ANAKTPRYLSWDQ5K4N7VWUZCTADUIZ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/GMFXELTA2D2KIAJMO44E6XMGPZ7GBOJG/",
    "sender": {
        "address": "dave (a) zdap.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "David Palmer",
    "subject": "[amsat-bb] Re: SatPC32 - FT-817",
    "date": "2011-02-10T19:57:24Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZHXOWRAFRR4DZVPFFY573C7A6ISBO7ZX/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Sure can, I've done it before switching to the twin radios.  If you\nonly configure one radio with SatPC32, it uses the \"SPLIT\" fuction of\nthe FT8x7 to automatically set both the RX and TX frequencies for\ndoppler on VFOs A & B.\n\nRemember that a critical factor for operating on the linear birds is\ncalibrating your particular radio for the uplink / downlink offset.\nThis is really easy with two radios (since you can hear your own\ndownlink) but with a single radio it's much more difficult.  Out of\nthe box, my twin FT-817's were about 2 kHz off with the default\nfrequency offsets in SatPC32.  Before ARISSat, try practicing on VO-52\nor AO-7 with their 70cm uplinks and 2m downlinks -- they're often not\ncrowded at all, and it will be good to get your rig close in\ncalibration with the help of some others on the air there.\n\n73 de Dave KB5WIA / CM88\n\nOn Thu, Feb 10, 2011 at 11:33 AM, Ron Overdrive\n<[email protected]> wrote:\n> Question I have is, is it possible to use SatPC32 to control 1 FT-817 either\n> in split frequency or in each VFO (ie switching between VFO A & B) with the\n> Doppler shift corrections? At this time my FT-817 is my only 2m/70cm rig\n> that supports SSB and I would like to be able to operate on the linear birds\n> especial ARISSat-1 when its launched. I'm fully aware I would not be able to\n> hear myself in the preferred full duplex operation, but something is better\n> then nothing until I can acquire another SSB rig either in 2m or 70cm.\n>\n> ~73, AC2RF Ron\n",
    "attachments": []
}