Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/F7R3F23M4GHN6YGJOLJALUHWVCE55XOK/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "F7R3F23M4GHN6YGJOLJALUHWVCE55XOK",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/BWY7SIU2NEOSCHNUNLPKPZLYO3MCTOGT/?format=api",
    "sender": {
        "address": "jari.koivurinne (a) aina.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Jari Koivurinne",
    "subject": "[amsat-bb] Re: 847 PL problems",
    "date": "2009-12-20T17:59:23Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RQIUPM647M4BOGMX7T46P27DFX6CKMN7/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "> \n> \n> I just noticed that my FT-847 is having a problem with PL tones. \n> There are a\n> few things happening...\n>  It seems to want to stay only in a PL of 67.0. When I try to operate on\n> SO-67 that has a PL of 233.6, I can't get into the bird, unless I \n> tailgate.\n> As it seems to default to a PL of 67.0 I can work SO-50 no problem. I\n> checked all my cables, and also went to a different software \n> control program\n> and it all points to a problem with my 847. After some testing with\n> different PL's, using another radio with TQSL set, it seems that when in\n> Satellite mode my 847 will only transmit a PL of 67. I've had my 847 I\n> bought new since 1997 and I never had a problem with This. When I \n> look back\n> I can't  remember when I needed any other PL other then 67.0, \n> except 74.4 to\n> open up SO-50, last time about 3 years ago. Before I try a full reset I\n> thought I would ask here, to make sure I'm not missing anything \n> stupid...  \n> \n> \n>  73 Jeff kb2m\n> \n>\n\nHi\n\nPress the MENU button, rotate the SUB-TUNE knob to select Menu #12,\nThat is \"TONE-FRQ\".\nThen rotate the MEM/VFO CH knob to set the right PL.\nThen press the MENU again to exit.\n\nTo activate PL just select FM-mode and press the grey TONE knob (3).\nThere is a sign ENC visible. You can check that the PL is correct\nby pressing the MENU again. IF not, just rotate the MEM/VFO CH knob.\n\nIf that doesn't work out, maybe the memory backup battery has run out\nof juice. Check also the position of the battery backup switch.\n\n73'\n\n-Jari oh3uw\n\n \n",
    "attachments": []
}