Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/FB73TA5N5PSPTTG35JKSCZLV7FUU4ZK5/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "FB73TA5N5PSPTTG35JKSCZLV7FUU4ZK5",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/FB73TA5N5PSPTTG35JKSCZLV7FUU4ZK5/",
    "sender": {
        "address": "pa3guo (a) upcmail.nl",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "PA3GUO",
    "subject": "[amsat-bb] Re: Funcube-1 decoding",
    "date": "2013-12-26T11:09:01Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Interesting; \n\nThis morning (10:55utc) during an almost perfect North --> South pass, 70\ndegrees max elevation, \n(using exactly the same station configuration as yesterday)\n\nFuncube-1:\n- did not show any variations wrt polarization (was a lot yesterday), only\nslow fading in overall strenth\n- had weak downlink (SNR much lower as yesterday, could see it even on the\nSDR display only as of 16 degrees ele.)\n\nHenk, PA3GUO\n\n\n-----Oorspronkelijk bericht-----\nVan: PA3GUO  \n\nUsing a 2x6 elements beam + pre-amp + an FCD, it is possible to decode\npackets down to just 0.7 degrees elevation.\nRather impressive.\n\nAlso I noticed that if I have other CPU intensive SW running (HRD) at the\nsame time, nothing is decoded. Visually it all looks the same on the\nFUNcube-1 Dashboard, signal strenghts etc., but somehow it needs maybe more\nPC resources (memory?) for the actual decoding, because as soon as I closed\nHRD incoming packets got decoded, while before none of them was.\n\nHenk PA3GUO\n\n\n",
    "attachments": []
}