Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/G5IPIKL4OXYWENV6G62XK3K65Q23SMOX/
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/G5IPIKL4OXYWENV6G62XK3K65Q23SMOX/", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/", "message_id": "[email protected]", "message_id_hash": "G5IPIKL4OXYWENV6G62XK3K65Q23SMOX", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/DUFREJWAWM2KUGILFHARWOABFVPVOCOY/", "sender": { "address": "pd5dj (a) pd5dj.nl", "mailman_id": null, "emails": null }, "sender_name": "Björn Pasteuning - PD5DJ", "subject": "Re: [amsat-bb] myflydream for LEO?", "date": "2014-07-09T13:00:38Z", "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/DUFREJWAWM2KUGILFHARWOABFVPVOCOY/", "children": [], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "Hi Bill\n\nfunny you mention Myflydream\n\nI am the Mylfydream service point for the Netherlands, I have discussed \nthis with the developer Ming about this.\nI know the protocol that is used to control the AAT (black box).\nThe AAT is connected to the Driver (blue box) the blue box decodes \ntelemetry data from the plane. then sends a serial command to the AAT to \nPan and Tilt in the correction directions.\nInside the AAT there is a 6 or a 12ch slipring for endless rotation.. \n(too keep in mind!) and cannot be limited to a min and max position..\n\nI already wrote a little software some years ago that converts GS-232B \nprotocol to MFD Protocol..\n\nI have to digg up the project.\n\nThe thing why I did not continue this project is the endless rotation of \nthe AAT, If i command the AAT to 355 degrees it will choose the shortest \ndirection.\nSo eventually wires will get tangled. ;-)\n\n73\nBjorn - PD5DJ\nwww.pd5dj.nl\n\n\nBill (W1PA) schreef op 8-7-2014 19:42:\n> Anyone aware of any projects to adapt this technology to LEO tracking?\n>\n> Bill W1PA\n>\n> http://www.youtube.com/watch?v=SGQ-tLxafdM\n>\n>\n>\n\n", "attachments": [] }