Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/GJR55KUU7ZEGWHB4GWE4KMMDWCATOU4E/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "E94B7968307541A4B8AD1DCFF9267E69@JamesPC",
    "message_id_hash": "GJR55KUU7ZEGWHB4GWE4KMMDWCATOU4E",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/MVVF25AYHXTJ5JYHQPFV52EIUQR5ZOWN/?format=api",
    "sender": {
        "address": "jdanehy (a) cinci.rr.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Jim Danehy",
    "subject": "[amsat-bb] Re: Best type of coax to use between preamps and antennas",
    "date": "2008-07-01T12:33:05Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/MVVF25AYHXTJ5JYHQPFV52EIUQR5ZOWN/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/K2KNYK2X5VREDQTT6EXEKRECZC6PKG7X/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Ron\n\nDid you diagnose what your problem was ? Water in the coax ? Where is  your \npreamp mounted ? If very near (10 feet) the antenna you can use RG8. If you \nfeel intimidated by N connectors (many folks are), Henry Radio and others \nsell a two (2) piece N connector that is installed much like a PL 259 which \nyou have probably installed many times. Check out Henry Radio on Ebay. If \nyou need more info on this email me direct. I think they get around $4 a \nconnector. A short run (10 ft) of RG8 at 432mhz or 144mhz is not too \nprohibited, in my opinion. Or you can have somebody put together a jumper as \nyou have noted. Self reliance provides better quality control in my opinion.\n\nJim W9VNE\n----- Original Message ----- \nFrom: \"Ronald Nutter\" <[email protected]>\nTo: <[email protected]>\nSent: Monday, June 30, 2008 8:49 PM\nSubject: [amsat-bb] Best type of coax to use between preamps and antennas\n\n\n> After problems I had on Field Day in trying to operate the satellites, I \n> am looking to upgrade the coax I use between the preamps and the antennas. \n> I am using 9913FX from the IC-910H and the preamps.  I had been using RG \n> Mini 8/U for the connection between the preamps and antennas.  Should I \n> also use 9913FX between the preamps and the antennas?  The run between the \n> radio and the preamp is 50 ft.  The run from the preamp to the antennas is \n> about 10 - 15 ft depending on where I set the antennas up.  I am concerned \n> about how flexible the 9913FX would be in terms of the antennas rotating \n> back and forth.  I was planning on ordering the cables pre-made from \n> CableXperts since working with N connectors isnt my strong point and dont \n> want to worry about my soldering and having a good connection on both ends \n> of the cable.\n>\n> Any suggestions appreciated.\n>\n> Thanks,\n> Ron\n> KA4KYI\n>\n> \n\n",
    "attachments": []
}