Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/GZAIZ4MNPC37FF5JB5O27TBW4HUBHWFN/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "449FF0D971084C23BE13D03D11CA0B76@HildaEichmanPC",
    "message_id_hash": "GZAIZ4MNPC37FF5JB5O27TBW4HUBHWFN",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/3RTGZ3ARIRYT7AA4K4CLTRCYBNMGUQ6O/?format=api",
    "sender": {
        "address": "erich.eichmann (a) t-online.de",
        "mailman_id": "6679c7cde510458f8117afd8289f9948",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6679c7cde510458f8117afd8289f9948/emails/?format=api"
    },
    "sender_name": "Erich Eichmann",
    "subject": "[amsat-bb] Re: Satpc32 Storing Rx/Tx addreses",
    "date": "2013-09-30T07:54:22Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/3RTGZ3ARIRYT7AA4K4CLTRCYBNMGUQ6O/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hello Carl,\nset the Icom addresses in the menu \"Radio Setup\". Click on the little \ncontrol right hand of the word \"Model\". In the list that opens choose \n\"Addresses\". The first Icom address pair will be displayed in the address \nwindow. With the up/down controls set the address values. If you use a \nsingle Icom transceiver both addresse values must be equal. If you use \nseparate Icom radios for RX and TX set the first address value for the RX, \nthe second one for the TX.   Then click \"Addresses OK\"  and  then the Store\" \nbutton. If you use a single  Icom radio as TX (besides another brand as RX) \nset the address value in the \"Radio 2\" section of the menu.\n\nIf you want to change the multiple address pairs that appear in menu \"Mode\" \nchoose \"Addresses\" in menu \"Radio Setup\" as described above. Click on the \nlittle control right hand of the address window. Choose and modifiy the \nother address pairs and save the changes of each pair.\n\n73s, Erich, DK1TB\n\n----- Original Message ----- \nFrom: \"carl creamer\" <[email protected]>\nTo: <[email protected]>\nSent: Sunday, September 29, 2013 9:10 PM\nSubject: [amsat-bb] Satpc32 Storing Rx/Tx addreses\n\n\nI'm having an issue with having Satpc32 storing the Mode/Rx/Tx addresses.\nWhen I start the program, I store the correct settings for my Icom and it \nall works fine , but when I reboot and/or restart the Satpc32 later I have \nto go to the mode screen and reset the Mode/Rx/Tx addresses.\nIs this normal or is there a way to have them permanently stored?\nThanks\nCarl\n_______________________________________________\nSent via [email protected]. Opinions expressed are those of the author.\nNot an AMSAT-NA member? Join now to support the amateur satellite program!\nSubscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n\n\n",
    "attachments": []
}