Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HBFSU3FVBPH5ZQPNQ2B7DCHRWWUQJUW7/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "HBFSU3FVBPH5ZQPNQ2B7DCHRWWUQJUW7",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/HBFSU3FVBPH5ZQPNQ2B7DCHRWWUQJUW7/?format=api",
    "sender": {
        "address": "k.swaggart (a) charter.net",
        "mailman_id": "b53f0c8256f444dea314ac1412cd4bd5",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/b53f0c8256f444dea314ac1412cd4bd5/emails/?format=api"
    },
    "sender_name": "[email protected]",
    "subject": "[amsat-bb] G5500 left turn relay failure",
    "date": "2020-10-19T21:44:32Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/YV7LQWQAACPIBRYZQ43GV4DFQPG2NACX/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "My G5500 control box won't command the rotor left, but right works fine. No\nvoltage to the #4 connector when I press \"left\", but if I put some pressure\non the relay the voltage intermittently returns. So, guess the relay\ncontacts are dirty.\n\n \n\nLooking at the schematic it looks like both the right and left relays are\nthe same, but use different connections. So. thinking I'll just remove and\nthe two and swap relays. (This unit has been in daily use since 2002!)\n\n \n\nAre these relays available from Yaesu or someone in the US? Did a quick\nGoogle and DigiKey search but didn't find them.\n\n \n\nJust noticed there is a little lid on the top of the relay. When I popped\nthat open there is a lot of black residue on the inside of the lid and I\njust might be able to clean the contact!\n\n \n\nKen, W7KKE\n\n \n\n",
    "attachments": []
}