Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HJ6NW7UJKUEWUOICGU6EXL5MEZUFPL23/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "CAGu+VYsJezDQLpm++S=du1Y8Uke-vrNWhktXKtzeL9WntnQUSA@mail.gmail.com",
    "message_id_hash": "HJ6NW7UJKUEWUOICGU6EXL5MEZUFPL23",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/HJ6NW7UJKUEWUOICGU6EXL5MEZUFPL23/",
    "sender": {
        "address": "nicholasmahr1 (a) gmail.com",
        "mailman_id": "79425244f2464f9f81186dff7de77344",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/79425244f2464f9f81186dff7de77344/emails/"
    },
    "sender_name": "Nicholas Mahr KE8AKW",
    "subject": "[amsat-bb] DopplerPSK - No 1 kHz-autotracking radio",
    "date": "2019-06-13T21:05:47Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Yes what Tom and Scott said is what I do and is the correct way of working\nNO-84. You cannot just tune the 10m uplink like you would a linear\ntransponder with SatPc32. It will make the PSK31 signal on the transponder\nundecodeable. The only real way to work it is with Doppler PSK. My setup\nconsists of a FT-847 on the 70cm downlink, with SatPC32 correcting the\ndoppler on the downlink which by the way I have no issues with. Then I have\nmy FT-950 doing the uplinking on 10m (I use the FT-847 for VHF/UHF/Sat Only\nand FT-950 for HF only). I use a homebrew dipole that is actually for\n40/80m but it tunes up on 10 meters just fine and works well for the uplink\non NO-84. I then use FLdigi to decode the PSK31 signals as FLDigi allows\nmulti-decoding for PSK31 which allows me to decode multiple signals in the\npassband at once. And of course I use DopplerPSK for the generation and\ncorrection of the PSK31 signal. Hope this helps. Unfortunately there is not\na lot of activity on the PSK31 transponder but I hope that changes with the\nupcoming launch with Psat-2.\n\n- Nick KE8AKW\n",
    "attachments": []
}