Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HMOL2QHDZ7MIZSSXRINBH5IU4JTHFUYV/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "HMOL2QHDZ7MIZSSXRINBH5IU4JTHFUYV",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/HMOL2QHDZ7MIZSSXRINBH5IU4JTHFUYV/",
    "sender": {
        "address": "dimtcho (a) shaw.ca",
        "mailman_id": "89b9ac8d5441426c920ecc8d0192b850",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/89b9ac8d5441426c920ecc8d0192b850/emails/"
    },
    "sender_name": "MAC1",
    "subject": "[amsat-bb]  Active ISS L/V with 10W and 16 element yagi",
    "date": "2009-01-03T10:06:14Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi to all,\n\nJust to confirm that I made a contact with ISS L/V repeater using the  \nfollowing set up:\n\nFT 736R  with 10W on 1.2 GHz\n16 El Comet 1216E horizontal yagi on 1.2 GHz (16 db gain, 54 inches  \nlong )\n120 Ft of LMR 400 from the shack to the top of the tower (loses 4.5  \ndb/ 100 ft  @1.2 GHz)\nERP is less than 120 Watt ( not counting the \"N\" connectors )\nUsing manual doppler (hard to tune with the SatPC32)\nTime was 9.33 AM UTC  (1.33AM local time), location Vancouver, BC,  \nCanada, CN89\nMax elevation 42 deg, I turned the repeater at around 32 deg  \nelevation with FM-N.\nTalked to myself for about 30 sec or so... lost again around 32 deg ..\n\n73!\nDino\nVE7XDT\n\n\n\n",
    "attachments": []
}