Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HTMTKWJSD6O6ZASNVJRV5OSCJYLPSHVO/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "00b601c70c2e$96934010$0700a8c0@AlienwareArea51m",
    "message_id_hash": "HTMTKWJSD6O6ZASNVJRV5OSCJYLPSHVO",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/HTMTKWJSD6O6ZASNVJRV5OSCJYLPSHVO/",
    "sender": {
        "address": "heartdoc (a) nwtcc.com",
        "mailman_id": "4da7bb80ad75404cbde07113714807e8",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4da7bb80ad75404cbde07113714807e8/emails/"
    },
    "sender_name": "James C. Hall, MD",
    "subject": "[amsat-bb]  Unitrac reinstall problem",
    "date": "2006-11-19T23:00:48Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hello All:\n\n \n\nI recently had to reinstall WinXP and all software on my computer and I'm at\nthe point of getting Unitrac working again. Hardware-wise I have an add-in\nparallel port PCI card for my metal-boxed LPT-version of Unitrac interface.\nI quickly discovered that my old Epson 740 desires LPT1 and only 1. I have\nthe Unitrac connected to the onboard port assigned to LPT3 and set to\nNormal, not ECP or EPP, in the BIOS. Installation of the software (UT3) went\nsmoothly and I applied the 113 update. I applied fresh keps and fired it up.\nAfter the initial configuration (Com/LPT=3) all appeared to be well. I set\nup AO-51 as an initial bird, and then tried it out.\n\n \n\nIt was here that I discovered that the G-5500 controller was not talking to\nthe Unitrac. All I got was zero's and \"rotators free\" in the control panel.\nI tried the calibration routine but could not get the 0's to change at all.\nManually, there was no problem moving the rotator(s).\n\n \n\nDLPortIO is installed (of course). \n\n \n\nCan somebody point me in the right direction on this ?  Thanks.\n\n \n\n73, Jamie\n\nWB4YDL\n\n",
    "attachments": []
}