Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HYGRCUE3IHJSKAQRFRJB7XWJZNBGW5FW/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "A5666060EC3541878EA5C9C90D94CCD8@PackardBellPC",
    "message_id_hash": "HYGRCUE3IHJSKAQRFRJB7XWJZNBGW5FW",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/6BAZV6JXNM2JNGW25NIGPZ46LV46MC4O/?format=api",
    "sender": {
        "address": "erich.eichmann (a) t-online.de",
        "mailman_id": "6679c7cde510458f8117afd8289f9948",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6679c7cde510458f8117afd8289f9948/emails/?format=api"
    },
    "sender_name": "Erich Eichmann",
    "subject": "[amsat-bb] Re: SatPC32 Question",
    "date": "2012-07-22T17:21:11Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6BAZV6JXNM2JNGW25NIGPZ46LV46MC4O/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hello Kelley,\nto steer both radios you only need a single COM port and  a single CAT\ninterface or \"CAT cable\" with - for example - an y-adapter.\nIn menu \"Radio Setup\" , \"Radio 1\"  section, choose Icom for brand and the\nIC-706MKIIG for model. Set the CAT baudrate to 19200, do the same at the\nradios.\nIn the menu set the first of the 2 Icom addresses for the IC-706MKIIG ($58\nby default) and the 2nd one for the IC-746 ($56 by default). Click\n\"Addresses OK\". Choose a proper COM port and set the CAT delay to 50 (try\nthe lowest working value lateron). Leave all other options in menu \"Radio\nSetup\" unchecked. Set the Radio 2 section to \"None\".\nSave the settings and restart the program. Click the \"C\" control to \"C+\".\nWith v/u sats (FO-29, SO-50)  the program should now steer the IC-706 as RX\nand the IC-746 as TX. With SSB sats you can tune th IC-706 around the\npassband and the IC-746 will follow.\n\nTo steer the radios with u/v sats (VO-52, AO-07) set the second address pair\nin menu \"Radio Setup\" to the vice versa addresses (first value for the\nIC-746, second value for the IC-706). Save the changes and restart the\nprogram.\nThe program will start with the settings for v/u sats. To run with u/v sats\nopen menu \"Mode\" and select the 2nd address line. The IC-746 will now run as\nthe RX on VHF and the IC-706 as TX on UHF. You can tune the IC-746 in the\npassband with its VFO and the IC-706 will follow.\n\n73s, Erich, DK1TB\n\n\n\n----- Original Message ----- \nFrom: \"Kelley\" <[email protected]>\nTo: <[email protected]>\nSent: Sunday, July 22, 2012 4:28 PM\nSubject: [amsat-bb] SatPC32 Question\n\n\n\nSatellite newby here, trying to setup a station...\n\nFor all you SatPC32 users, a question. I'm using the software with 2\nradios. One is an Icom IC-706MKIIG, the other is a Icom IC-746. While\nthe 706 covers vhf and uhf, the 746 only covers vhf.\n\nThe way my version of SatPC32 is set, it tries (depending on the\nsatellite) to set the 746 to uhf. I suspect there is a way to tell the\nsoftware that a radio can only do vhf, but can't seem to find where to\ndo that. Anyone know?\n\nThanks,\n\n-- \nKelley - WØRK\n\n\n_______________________________________________\nSent via [email protected]. Opinions expressed are those of the author.\nNot an AMSAT-NA member? Join now to support the amateur satellite program!\nSubscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n\n\n",
    "attachments": []
}