Show an email

GET /hyperkitty/api/list/[email protected]/email/IKSRDPODHUTHKI5RP7URTZWUXAV3JAOD/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/IKSRDPODHUTHKI5RP7URTZWUXAV3JAOD/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "IKSRDPODHUTHKI5RP7URTZWUXAV3JAOD",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ARNC3NAKNV72SYMDB3KW7Y4MU762TKZC/?format=api",
    "sender": {
        "address": "dquagliana (a) aol.com",
        "mailman_id": "75c9beaffd1d4a0cb28236652097bbb0",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/75c9beaffd1d4a0cb28236652097bbb0/emails/?format=api"
    },
    "sender_name": "Douglas Quagliana",
    "subject": "[amsat-bb] Re: FCAL packet recovery",
    "date": "2007-02-14T21:21:32Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ARNC3NAKNV72SYMDB3KW7Y4MU762TKZC/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "[email protected] wrote:\n> Any\n> suggestions for post-processing the audio with the intent of pulling AX.25\n> packets out of the muck?\n> \n> Jim3 KB3MPL\n\nGet an audio processing program like CoolEdit, Audition, or\nAudacity and FIR filter the audio to remove as much of the\n\"noise\" as you can. You probably want to start by filtering\nout everything below about 1000 Hertz or above about 2500\nHertz. The exact cutoff numbers you choose depend on the\ncharacteristics of the particular DSP filter you are using\nand its rolloff, but the idea is to throw away as much of\nthe noise as you can and just leave the packet tones.\n\nSometimes this is all you need...\n\nOf course, if one or more bits in the packet really ARE\ncorrupted with in-band noise, then the packet still won't\ndecode.\n\nIf you want, email me a copy of the recording and I'll\ntake a look too.\n\nDouglas KA2UPW/5\n\n",
    "attachments": []
}