Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/IMP537IUE5WTRFF35DGQUA6XPG3VJ3RL/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "IMP537IUE5WTRFF35DGQUA6XPG3VJ3RL",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/IMP537IUE5WTRFF35DGQUA6XPG3VJ3RL/",
    "sender": {
        "address": "rhyolite (a) nettally.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Joe Leikhim",
    "subject": "[amsat-bb] Re: az-rotor",
    "date": "2012-11-30T21:32:54Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Al;\nDid you try the method in the manual first to set the rotor up? I followed the manual and it worked fine.\n\n\n\nSubject: [amsat-bb] Re: az-rotor\nMessage-ID: <ABBEFC4E69E44BE4894A1C23DA4B0F8C@AlPC>\nContent-Type: text/plain;\tcharset=\"iso-8859-1\"\n\nHi Erich et al.,\n\nFollowing suggestion I did the following. Since the rotor goes beyond 180 on the right side of its travel I let it go until it stopped. I then visually noted how much beyond 180 it had gone, divided by 2 and brought the dial back to 360 plus the number just obtained. I then assumed the pot was at its halfway position. I made the following resistance measurements 1-2 was 209.7 ohms, 2-3 was 206.1 ohms, and 1-3 was 415 ohms. Considering the manual guess work I think that is a pretty good result. I then ran SatPC32 and attempted to park the rotor at 360. It was off, I had to park it at 341 for the rotor to actually be at 360. This is basically the same result as before when I was just going by the control box readings. I believe the resistance measurements would suggest that there is not a short in the pot (unless it just happened to be around the halfway point).\n\nAt this point I am not sure what to try next\n\n73 Al W8KHP\n\n-- \nJoe Leikhim\n\n\nLeikhim and Associates\n\nCommunications Consultants\n\nOviedo, Florida\n\[email protected]\n\n407-982-0446\n\nWWW.LEIKHIM.COM\n\n",
    "attachments": []
}