Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/J5W3F7KBWOFTB74QO2V3LEIG4X3P2BHH/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "J5W3F7KBWOFTB74QO2V3LEIG4X3P2BHH",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/UOPKIV35K7P75UVVZLTFODI7C2G3QIRA/?format=api",
    "sender": {
        "address": "nate (a) natetech.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Nate Duehr",
    "subject": "[amsat-bb] Re: weird 847 behavior",
    "date": "2006-10-11T20:34:10Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/UOPKIV35K7P75UVVZLTFODI7C2G3QIRA/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Jeff Griffin wrote:\n\n>   So it appears the fix was a loose semi-grounded board, most notably the\n> AF-CNTL unit board. Thanks to everyone that emailed me privately with\n> their suggestions....\n\nI'd be interested in what you heard about various ideas.  I have an \nFT-847 that any time a mic that draws power for features (i.e. DTMF mic) \nis used, a noticeable but light hum is introduced in the transmitted audio.\n\nYaesu took a look at it and replaced a cap in the power supply section, \nbut it didn't fix the problem.  (And cost $90... what a waste sending \nthings to Yaesu is these days... apparently they don't look at anything \non a service monitor before sending it back.)\n\nOne of the \"common\" failures in the FT-847 appears to be bad grounds \nfrom loose boards inside.  I may have to open mine up and check that \nout, if I can ever make the time to do it.   Maybe it'll end up on my \nchecklist for radio maintenance annually -- just open the thing up and \ntighten everything.  Maybe a mod to ensure proper board to board \ngrounding...\n\nAlways something to do... the FT-847 problem isn't high on my list \nbecause it's easy to avoid (using the stock mic or a Heil headset, the \nproblem doesn't exist, using any mic with power draw it does... quite \nodd, but at least it's nailed down to a particular circuit... better \nthan SOME troubleshooting \"fun\" I've had over the years).\n\nNate WY0X\n",
    "attachments": []
}