Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/JETEQLSRQ2DUFTYVF4SJB3V46WU7RVPL/
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/JETEQLSRQ2DUFTYVF4SJB3V46WU7RVPL/", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/", "message_id": "[email protected]", "message_id_hash": "JETEQLSRQ2DUFTYVF4SJB3V46WU7RVPL", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/JETEQLSRQ2DUFTYVF4SJB3V46WU7RVPL/", "sender": { "address": "se_oneal (a) hotmail.com", "mailman_id": null, "emails": null }, "sender_name": "Steven O'Neal", "subject": "[amsat-bb] Link requirements for LEOS", "date": "2009-12-01T01:11:58Z", "parent": null, "children": [], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "\nAll,\n\nMaybe a dumb, maybe a redundant question that has been asked and answered multiple times, but here goes.\n\nWhat sort of link requirements are required to work the current crop of LEOS in terms of antenna options and commercially available omni antennas? \n\nI was quite active in the early 90's on the Ko23 and Uo22 birds, ended up with a steerable array (Cushcraft ones), and that worked fine, but wanted to take another run at working the current crop with something a little less demanding in terms of getting up in the air and steering. \n\nI've been reading a bit about the M2 Eggbeaters, which seem to pretty good, but wondering what sort of operating result I would get driving them with a bare 10 watts out of a FT 726 for a 2 meter up-link and perhaps a preamp on the 70cm side. \n\nI'd appreciate any observations, comments, results, hints, tips, or whatever you would care to share.\n\nThanks\n\nSteve N6CRR/VK8SO (from back in the day)\n\n\n \t\t \t \t\t \n_________________________________________________________________\nHotmail: Trusted email with Microsoft's powerful SPAM protection.\nhttp://clk.atdmt.com/GBL/go/177141664/direct/01/\nhttp://clk.atdmt.com/GBL/go/177141664/direct/01/\n", "attachments": [] }