Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/JIEGNX7QWMMZHR6NZ27KXP3PGVZSQA7X/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "JIEGNX7QWMMZHR6NZ27KXP3PGVZSQA7X",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/IOOI33XMSNNEGGA6K4BX7URM72YEF6DY/?format=api",
    "sender": {
        "address": "erich.eichmann (a) t-online.de",
        "mailman_id": "6679c7cde510458f8117afd8289f9948",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6679c7cde510458f8117afd8289f9948/emails/?format=api"
    },
    "sender_name": "Erich Eichmann",
    "subject": "Re: [amsat-bb] Help with SatPC32 and Dual Radios",
    "date": "2019-06-05T21:44:56Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/IOOI33XMSNNEGGA6K4BX7URM72YEF6DY/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Michael,\nyou want to use one radio for RX and TX on VHF, the other one for RX and \nTX on UHF. So, I suppose you have the VFH antenna connected to one radio \nand the UHF antenna to the other. You are right, normally Radio 1 is \nalways the receiver and Radio 2 the transmitter. So, if you switch \nbetween V/U and U/V sats it would be necessary to switch the antennas, \ne.g. using a transfer coax switch.\nTo avoid this disadvantage check option \"Autom. Rx/Tx Change\" in menu \n\"Radio Setup\". (Leave all other options in the menu unchecked). This \nfeature will change the roles of the radios as Rx and Tx. If -e.g.- \nradio A is the Radio 1 and connected to the UHF antenna it will be the \nRX with V/U sats (Fo-29). You can tune the radio around the passband and \nradio B will follow. If you switch to a U/V sat (AO-07) radio B will \nbecome work as the RX. You can tune it in the passband and radio A will \nfollow.\n\nThis feature works only if you switch between v/u and u/v sats, not for \nother bands like your 2.4 GHz downlink. Then you will  use the radio \nwith the downconverter for RX. If the uplink 2 m user the othe for TX, \nif the uplink is UHF use the same FT-847.\n\n73s, Erich, DK1TB\n\nAm 05.06.2019 um 22:32 schrieb Michael Wolthuis via AMSAT-BB:\n> Ok, so I am fairly new to SatPC32 since leaving my old setups....\n>\n> I have dual FT-847's setup as follows:\n>\n> FT-847 - TX/RX UHF, RX 2.4ghz (down convert to VHF)\n> FT-847 - TX/RX 2m\n>\n> So, I setup SatPC32 for two radios.  Both radios are being controlled.\n>\n> Issue is it is fine for V/U, but then on a U/V SAT it has the frequencies\n> flip-flopped.\n>\n> In other words, I think it always uses RADIO A for uplink and RADIO B for\n> downlink?\n>\n> Is there a way to change/fix this behavior?  I want U on the UHF radio and\n> V on the VHF radio.\n>\n> Mike\n> kb8zgl\n> _______________________________________________\n> Sent [email protected]. AMSAT-NA makes this open forum available\n> to all interested persons worldwide without requiring membership. Opinions expressed\n> are solely those of the author, and do not reflect the official views of AMSAT-NA.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings:https://www.amsat.org/mailman/listinfo/amsat-bb\n",
    "attachments": []
}