Show an email

GET /hyperkitty/api/list/[email protected]/email/JY7VEXWFAROYFZTUW245TQAT4L7AE6RQ/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/JY7VEXWFAROYFZTUW245TQAT4L7AE6RQ/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "005e01ca5ff2$e0bbaa40$0200a8c0@Tanguray",
    "message_id_hash": "JY7VEXWFAROYFZTUW245TQAT4L7AE6RQ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/HS4LDFN3KKT2WHOSJBLKTOKQBX2L2NIL/?format=api",
    "sender": {
        "address": "rogerkola (a) aol.com",
        "mailman_id": "8323dbe496014835b5bd2be9b5ff6f66",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/8323dbe496014835b5bd2be9b5ff6f66/emails/?format=api"
    },
    "sender_name": "Roger Kolakowski",
    "subject": "[amsat-bb] Re: SO-67 over Europe thanks for test",
    "date": "2009-11-07T21:38:21Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Z5DNPGCK34J6P6MREAPLAANGYVP26AK7/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/IO6W73GT2MGQ7R27SX7ERO4IIX5Y4CZ4/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Yes it did help...2.5 KHz it is...\n\nRoger\nWA1KAT\n\n----- Original Message -----\nFrom: \"OZ1MY\" <[email protected]>\nTo: \"Roger Kolakowski\" <[email protected]>; \"Kostas Ioannidis\"\n<[email protected]>; \"AMSAT-BB\" <[email protected]>\nSent: Saturday, November 07, 2009 8:29 AM\nSubject: Re: [amsat-bb] Re: SO-67 over Europe thanks for test\n\n\n> Hi Roger and the -bb,\n> From memory it takes up less than 12.5 kHz which is the\n> channel spacing on 2 meters (In Region 1 at least).\n> Frequency deviation like 2.5 kHz (old 3.5 kHz and even some\n> have 5 kHz deviation).\n> It is the frequency deviation that is a the issue with SO-67 (I think).\n> If you run too high deviation on the uplink the LF to the transmitter will\n> make it deviate too much. Even for a normal (old) setting on the receive\n> side.\n>\n> The Carson rule says: Signal Bandwidth = 2 times (Deviation + modulation\n> frequency).\n>\n> Did that help ?\n> 73 OZ1MY\n> Ib\n> ----- Original Message -----\n> From: \"Roger Kolakowski\" <[email protected]>\n> To: \"OZ1MY\" <[email protected]>; \"Kostas Ioannidis\"\n> <[email protected]>; \"AMSAT-BB\" <[email protected]>\n> Sent: Saturday, November 07, 2009 3:03 PM\n> Subject: Re: [amsat-bb] Re: SO-67 over Europe thanks for test\n>\n>\n> > How \"narrow\" is FMN?\n> >\n> > Roger\n> > WA1KAT\n> >\n> > ----- Original Message -----\n> > From: \"OZ1MY\" <[email protected]>\n> > To: \"Kostas Ioannidis\" <[email protected]>; \"AMSAT-BB\"\n> > <[email protected]>\n> > Sent: Saturday, November 07, 2009 6:40 AM\n> > Subject: [amsat-bb] Re: SO-67 over Europe thanks for test\n> >\n> >\n> > > Hi Kostas,\n> > > If you do not have FMN on your radio, turn the mike gain down and/or\n> > > do not shout :-)\n> > > 73 OZ1MY\n> > > Ib\n> > > ----- Original Message -----\n> > > From: \"Kostas Ioannidis\" <[email protected]>\n> > > To: \"OZ1MY\" <[email protected]>\n> > > Sent: Saturday, November 07, 2009 12:20 PM\n> > > Subject: Re: [amsat-bb] SO-67 over Europe thanks for test\n> > >\n> > >\n> > > > Goodmorning,\n> > > > As the previous operator said thank you a lot for this great\nsounding\n> > > > sat! It was booming all tha pass.\n> > > > A lot of traffic on the air! But the narrow FM is an issue for those\n> > > > who do not use it...\n> > > >\n> > > >\n> > > >\n> > > >\n> > > > 73 de SW1IXP\n> > > >\n> > >\n> > > _______________________________________________\n> > > Sent via [email protected]. Opinions expressed are those of the\nauthor.\n> > > Not an AMSAT-NA member? Join now to support the amateur satellite\n> program!\n> > > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> > >\n> >\n> >\n>\n>\n>\n\n",
    "attachments": []
}